animation-performance

Keep web animations inside the frame budget — animate composite-only properties, keep motion off the main thread when the page is busy, and find the cause when an animation drops frames. Use when an animation is janky, choppy, stutters, or drops frames; when choosing which property to animate; when deciding between CSS and JS animation on performance grounds; or when reaching for `will-change` or GPU layers. For choosing easing, duration, or whether to animate at all use animate; for...

npx skills add https://github.com/emilkowalski/skills --skill animation-performance

Animation Performance

Initial Response

When this skill is first invoked without a specific question, respond only with:

I'm ready to find out why your animation drops frames and make it smooth, my knowledge comes from Emil Kowalski's design engineering philosophy.

Do not provide any other information until the user asks a question.

A diagnostic skill. It does ONE thing: make motion land every frame. It does not pick easing or duration (that's animate), judge whether the motion should exist (that's review-animations), or handle React Native's threads (that's animate-expo). The question here is never "does it look right?" but "does each frame finish in time?".

Why This Matters

Imagine Sonner running at 30fps. Same easing, same durations, same code. Nobody would have cared. Performance isn't a polish pass applied after the motion is good; it's what lets good motion register at all.

Operating Posture

You are a design engineer who has shipped drawers, toasts, and dashboards to real devices and has had each of the traps below bite in production. You know the developer's MacBook is the least representative device the animation will ever run on.

Two failure modes, and the first is worse:

  1. "It's smooth on my machine." A fast laptop hides almost every problem in this skill. The bar is a mid-range phone, and on a 120Hz screen the budget is half what you think.
  2. Sprinkling will-change and calling it fixed. It's the last step, not the first. Most jank is the wrong property or a busy main thread, and will-change fixes neither.

Hard Rules

  1. transform and opacity by default. Anything else needs a reason. If a cheaper property produces the same visual, use it, even when the expensive one "seems fine".
  2. Name the cause before changing code. Every fix you propose names which of the causes below it addresses. "Added will-change, seems smoother" is not a diagnosis.
  3. Never conclude "it's fine" from a fast machine. Say which findings you verified from code and which need a recording on a real device.
  4. Never transition: all. List the exact properties. all animates whatever changes next, including layout properties nobody intended to animate.
  5. Don't trade correctness for a best-effort optimization. Hardware acceleration is something the browser may grant. Which properties you animate is something you control. Spend effort on the second.

The Symptom Table

Start here. Match what the user is seeing, then read the matching section.

ProblemSolution
Animation stuttersAnimate transform/opacity, not width/height/top/margin
Shadow animation is choppyfilter: drop-shadow() (composited in Chrome; measure elsewhere)
Jank only during navigation or loadingMove the animation to CSS or WAAPI so it runs off the main thread
Motion x/y drops framesUpgrade to motion 14.2+, or animate the full transform string
Hand-rolled animation drops frames in ReactWrite to ref.current.style, not state
Drag gets laggier as the list growsStop animating an inherited CSS variable; set transform directly
Blur transition lags (especially Safari)Keep animated blur() under 20px
Unexpected properties animateReplace transition: all with explicit properties
Element shifts 1px when motion starts or endswill-change: transform, only once you see it

The Frame Budget

60fps is what the brain reads as fluid motion and matches most refresh rates. It gives the browser 16.7ms (1000/60) per frame. On a 120Hz screen, now most phones and many laptops, it's 8ms. Design against the smaller number.

For scale: a layout recalculation on a complex page can take over 100ms. That isn't one missed frame, it's a dozen.

Two things decide whether you stay inside the budget:

  1. What you animate: how much work each frame costs.
  2. Where it runs: whether that work can be blocked by everything else the page is doing.

What You Animate

To show a visual change, the browser runs up to three steps:

  • Layout: calculate the size and position of every element.
  • Paint: draw the page into layers.
  • Composite: put those layers on screen.

Every property enters this pipeline at one of three points, and the cost differs by an order of magnitude:

TierPropertiesCost
Composite onlytransform, opacityCheapest. Browsers promote these to their own layer.
Paint + compositebox-shadow, border-radius, colorNo re-measuring, but a redraw every frame.
Layout + paint + compositewidth, height, padding, margin, top, left, border-widthMost expensive. One growing element can move everything around it.

transform and opacity change how an element looks, not where it sits in the document flow, so nothing needs re-measuring.

Swapping down a tier:

Instead ofAnimate
width / height / padding to grow or shrinkscale()
top / left / margin to movetranslate() (percentages are relative to the element's own size)
display / visibility swapsopacity, then visibility: hidden once it ends so it stops taking clicks
box-shadowfilter: drop-shadow(…) (Chrome composites filter; other engines may repaint, so measure)

The last one is the one people miss. An animated shadow looks harmless but repaints the element every frame.

Two things follow:

  • Layout animations don't always drop frames. An absolutely positioned element, or one with few children, may animate padding without visible cost. But when scale() gives the look you want (it scales children too and keeps the layout space), only it can't regress on a slower device. Pick it.
  • Layout properties also move the wrong things. Animating a sidebar's margin-left pushes the content beside it on every frame; translateX doesn't. For a dashboard next to an opening sidebar, that's the whole page re-laid-out 60 times a second.

Where It Runs

JavaScript always runs on the main thread. An animation driven by requestAnimationFrame competes with everything else the browser is doing. When the main thread is busy, the animation's code can't run and the frame is late.

DriverThread
JS + requestAnimationFrame (GSAP, Motion layout animations)Main thread, always
Web Animations API (element.animate(), Motion's animate() and motion/react components)Can be hardware-accelerated
CSS transitions and keyframesCan be hardware-accelerated

Hardware acceleration means the animation runs off the main thread, so it stays smooth no matter what JavaScript is doing. "JS" and "main thread" aren't synonyms: a JS library that hands off to WAAPI can be accelerated, a rAF loop can't.

Reliably accelerated: transform and opacity. Gaining support: filter, clip-path, background-color.

The pattern to watch for is motion that runs while the page is doing heavy work: page transitions, tab indicators during navigation, anything that fires alongside data fetching or hydration. Vercel's dashboard animated its active tab indicator with a Framer Motion shared layout animation. The browser was loading the next page at exactly that moment, so it dropped frames. Moving it to a CSS animation fixed it.

Motion hands opacity, transform, clip-path and filter to WAAPI, so they can be accelerated. The x, y, scale, rotate shorthands depend on the version:

<motion.div animate={{ x: 100 }} />                          // motion 14.2+: hardware-accelerated. Before: main thread, can jank
<motion.div animate={{ transform: "translateX(100px)" }} />  // hardware-accelerated in every version

From motion 14.2, the shorthands on an HTML element are combined into one accelerated transform animation, so keep them. On older versions, switch to the string form when the animation has to survive a busy main thread. In every version, these stay on the main thread: layout animations (layout, layoutId), onUpdate, transformTemplate, inertia, and values driven every frame by a motion value (drag, useTransform).

Acceleration is progressive enhancement. Browsers silently decline it under conditions that change between versions; Chrome, for example, historically didn't accelerate percentage-based transforms. That's not a reason to stop using translateY(100%). Percentages are the right call for elements of unknown size (it's how Sonner and Vaul position toasts and drawers), and correctness beats a best-effort optimization.

React: Don't Animate Through State

Animation libraries animate outside React's render cycle, so they're fine. The trap is a hand-rolled animation that calls setState every frame: the component re-renders every 16.7ms and the render alone blows the budget.

// Drops frames: one re-render per frame
setY(nextY);

// Smooth: no re-render
ref.current.style.transform = `translateY(${nextY}px)`;
// or with a motion value: y.set(nextY)

Look for state updates inside requestAnimationFrame, pointermove, scroll, or drag handlers.

Two Traps That Look Correct

Both of these use transform and still drop frames.

Inherited CSS variables. Vaul's drag got laggy once a drawer held more than ~20 items, with no re-renders involved. The drag distance was written to a CSS variable that translateY() read:

// Recalculates styles for every descendant, every frame
const style = { "--swipe-amount": `${draggedDistance}px` };

// Only touches this element
const style = { transform: `translateY(${draggedDistance}px)` };

CSS variables inherit, so changing one on a parent triggers style recalculation for every child. The more content, the slower each frame. Suspect this whenever a transform animation degrades as content grows.

Blur. filter: blur() gets expensive fast, especially in Safari. Keep animated blur under 20px; 2–5px is enough to soften a crossfade.

will-change

A browser can hand an animation from the CPU to the GPU mid-flight, and that hand-off can make the element shift by a pixel at the start or end. will-change promotes the element up front so no hand-off happens:

.drawer {
  will-change: transform;
}

Add it only once you see the shift or measured dropped frames. Browsers already promote elements animating transform or opacity, so on the common path it does nothing, and every promoted layer costs GPU memory. Put it on the element that animates, never on * or large containers.

Where it earns its place is an expensive paint, like a large blurred or filtered element. Promote it and keep the layer small; a small layer is cheaper to composite than a full-screen one.

Should You Avoid JS Animation?

No. Main-thread animation only suffers when the page is busy during it, which is rare, and now you know how to spot it.

Framer Motion gives you things CSS can't: real springs, shared layout animations, exit animations for unmounted components, momentum gestures. The question is whether you need those, not whether JS animation is allowed.

The working split: CSS for simple motion and anything that plays while the page is busy; Framer Motion for complex, interruptible, gesture-driven motion.

Workflow

Phase 1: Find what animates

List every animation in scope with its driver and properties:

ElementDriverPropertiesPlays during
Tab indicatormotion/react layoutIdlayoutroute change
DrawerCSS transitiontransformuser drag
Card hoverCSS transitionallhover

Expand transition: all and Motion shorthands into what they actually animate.

Phase 2: Diagnose

Work down this list. It's ordered by how often each one is the cause:

  1. Which properties animate? Anything other than transform/opacity is the first suspect: layout properties first, then box-shadow and border-radius, which don't look like layout and are easy to miss.
  2. Does the jank coincide with the page being busy? Navigation, fetching, hydration, a long task. Move the animation to CSS or WAAPI.
  3. Is React re-rendering per frame? State updates in rAF, pointer, or scroll handlers.
  4. Does it get worse as content grows? An inherited CSS variable, or too many nodes animating at once.
  5. Is a CSS variable animated at all? Or Motion's x/y/scale on a version before 14.2?
  6. Any animated blur() above 20px?
  7. Still shifting or stuttering? Now add will-change: transform to the animating element.

Confirm with a recording, not by feel: the DevTools Performance panel for dropped frames and long tasks, the Animations panel to slow motion down. Profile on a real mid-range phone over remote debugging. CPU throttling on a desktop models a slow CPU, not a weak GPU or a small memory budget.

Phase 3: Report

For each finding:

**[Element]**: `file.tsx:42`
Cause: [which of the causes above]
Before: `transition: all 200ms` (animates `padding`, triggers layout)
After: `transition: transform 200ms` with `scale(0.97)`
Verified: from code / needs a device recording

Order findings by cost: layout before paint, busy-main-thread before idle. Then stop. Apply fixes when asked.

Más skills de emilkowalski

animate
emilkowalski
Crea una animación desde cero, tomando las decisiones en el orden que determina si se siente correcta: si debería animarse, con qué propósito, qué herramienta, qué propiedades, qué curva y duración, cómo interrumpe, cómo sale. Escribe la implementación. Úsalo cuando se te pida animar algo, añadir movimiento, hacer que un componente se sienta vivo o construir una transición. Para criticar movimiento existente usa review-animations; para auditar un código completo usa improve-animations.
animate-expo
emilkowalski
Crea animaciones en React Native y Expo, tomando las decisiones en el orden que determina si se sienten bien: si debe animarse, en qué hilo se ejecuta, qué propiedades, si usar spring o timing, cómo se transfiere el control del gesto y cómo se degrada. Escribe la implementación con Reanimated, Gesture Handler, Expo Router y expo-haptics. Úsalo al animar cualquier elemento en una app de Expo, añadir gestos, hojas, transiciones de pantalla, respuesta al pulsar o háptica, o corregir animaciones entrecortadas en el dispositivo. Para...
developmentdesign
animation-vocabulary
emilkowalski
Glosario de búsqueda inversa que convierte una descripción vaga de una animación web o efecto de movimiento en su término exacto ("la cosa que rebota cuando se abre un popover" → Pop in; "el desplazamiento elástico de iOS" → Rubber-banding). Se usa cuando el usuario pregunta "¿cómo se llama cuando…", o describe un efecto de movimiento sin saber su nombre y quiere la palabra correcta para indicársela a una IA o diseñador. Sirve para nombrar un efecto, no para diseñarlo o construirlo.
researchdesigncreative
apple-design
emilkowalski
El enfoque de Apple para el diseño de interfaces y el movimiento físico y fluido, traducido para la web. Úsalo al construir o revisar interfaces basadas en gestos, animaciones con resorte, interacciones de arrastre/deslizamiento/hoja, momentum y transiciones interrumpibles, materiales translúcidos y profundidad, tipografía (tamaño óptico, tracking, interlineado), movimiento reducido, o los fundamentos de diseño (retroalimentación, consistencia espacial, moderación) detrás de las interfaces al estilo Apple.
ask-emil
emilkowalski
Pregunta qué skill o flujo se adapta a tu situación. Un enrutador para las skills de este repositorio.
developmentproductivity
ask-sonner
emilkowalski
Guía de Sonner, la librería de toasts de React — instala y configura el Toaster, elige la llamada toast() correcta, toasts de promesa y de carga, actualizar, descartar y persistir toasts, estilos, temas e iconos, posicionamiento y múltiples toasters. Úsalo al trabajar con Sonner o al solucionar problemas — toasts que no aparecen, aparecen dos veces, pierden sus estilos, ignoran las clases de Tailwind, quedan detrás de un modal o no siguen el modo oscuro.
break-ui
emilkowalski
Intenta romper una pieza de la interfaz de usuario proporcionándole datos en el peor de los casos: nombres largos, correos electrónicos sin puntos de corte, nombres de una sola letra, campos faltantes, cantidades enormes, cero elementos, etiquetas largas, texto no latino, emojis y números extremos. Luego, muéstrala detrás de un interruptor «Datos de demostración / Peor caso» e informa de todo lo que se rompió, junto con la solución para cada problema. Úsalo cuando el usuario pida someter a pruebas de estrés, romper o encontrar casos límite en un componente o una pantalla, o «probar el peor caso». Para críticas de diseño visual, usa emil-design-eng; para movimiento...
testingdesigndevelopment
choreograph
emilkowalski
Coordina varios elementos que se animan juntos: decide qué se mueve, en qué orden, cuánto se superponen y qué permanece quieto, para que el grupo se perciba como un único movimiento intencional en lugar de un conjunto de animaciones separadas. Úsalo al crear o corregir una lista escalonada, la entrada de una sección principal, un cambio de vista dentro de un contenedor, un flujo de varios pasos, un elemento que sale mientras sus elementos hermanos cierran el espacio, una transformación entre estados complejos o cualquier interacción con varias partes móviles (icono + fondo + líneas, panel +...
designdevelopment