google-agents-cli-workflow

Agent Development Workflow & Guidelines

agents-cli is a CLI and skills toolkit for building, evaluating, and deploying agents on Google Cloud. It works with any coding agent — Antigravity CLI, Claude Code, Codex, or others — and with the agent framework of your choice (the Agent Development Kit (ADK) by default). Install with uvx google-agents-cli setup.

Before writing agent code, make sure a scaffolded project exists (see Phase 2). Skipping scaffolding loses eval boilerplate, CI/CD config, and project conventions.

Requires: google-agents-cli = 1.2.1 If version is behind, run: uv tool install "google-agents-cli=1.2.1"

Check version: agents-cli info Install uv first if needed.

Session Continuity & Skill Cross-References

Re-read the relevant skill before each phase — not after you've already started and hit a problem. Context compaction may have dropped earlier skill content. If skills are not available, run uvx google-agents-cli setup to install them.

Setup

If agents-cli is not installed:

uv tool install google-agents-cli

uv command not found

Install uv following the official installation guide.

Product name mapping

Users name products inconsistently (Vertex AI → Agent Platform, Agent Engine → Agent Runtime, etc.). Map user terms to CLI values using references/terminology.md.

Phase 0: Understand

Before writing or scaffolding anything, understand what you're building — through a design dialogue, not a checklist. Load references/brainstorming.md and follow it: ask one question at a time, propose 2–3 architecture approaches for non-trivial agents, and validate the design before any scaffolding.

If .agents-cli-spec.md exists in the current directory, read it — it is your primary source of truth. Otherwise:

Do NOT proceed to planning, scaffolding, or coding until the user approves the spec. Do not assume, research, or fill in the blanks yourself — the user's intent drives everything.

Scale the ceremony to complexity: a trivial agent (single tool, fixed persona) needs only a couple of questions, a 2–3 sentence spec, and one approval; a complex agent (multi-agent, RAG, external APIs/auth, safety-critical) gets the full treatment in references/brainstorming.md.

Topics to cover (one question at a time, adapting to the user — see the playbook):

1. What problem will the agent solve? — Core purpose and capabilities
2. External APIs or data sources needed? — Tools, integrations, auth requirements
3. Safety constraints? — What the agent must NOT do, guardrails
4. Deployment preference? — Prototype first (recommended) or full deployment? If deploying: Agent Runtime, Cloud Run, or GKE?

Ask based on context:

• If the agent needs retrieval/search over data (RAG, semantic/vector search, embeddings) → RAG is a clone-and-study recipe, not a scaffold flag. In Phase 1, study rag-vector-search (embeddings / similarity search) or rag-agent-search (managed document search) from references/samples.md and adapt one into your project.
• If agent should be available to other agents → A2A protocol is built into every Python agent scaffolded by agents-cli; no separate choice needed — just scaffold normally.
• If full deployment chosen → CI/CD runner? GitHub Actions (default) or Google Cloud Build?
• If agent should remember user preferences or facts across sessions → Memory Bank? Long-term memory across conversations. See /google-agents-cli-adk-code.
• If Cloud Run or GKE chosen → Session storage? In-memory (default), Cloud SQL (persistent), or Agent Platform Sessions (managed).
• If deployment with CI/CD chosen → Git repository? Does one already exist, or should one be created? If creating, public or private?

Once the design is agreed, write the spec to .agents-cli-spec.md using the template in references/spec-template.md, self-review it, then get the user's approval. See /google-agents-cli-scaffold for how these choices map to CLI flags.

Once you have a clear understanding, proceed to Phase 1.

Phase 1: Study Reference Samples

Ask yourself: is there a sample that can help me design this and cut time? Scan the keyword-indexed catalog in references/samples.md — it lists the samples and how to clone one. Multiple samples can match — clone and study all that are relevant.

If no sample matches, proceed to Phase 2. But first — are you sure? Re-read the user's request and compare it against the sample catalog in references/samples.md. Skipping a matching sample means rebuilding patterns that already exist.

IMPORTANT — Exit criteria: After studying a sample, ask yourself: can I apply anything from this sample to help me deliver the design? Note what you'll reuse before moving on. Do NOT proceed until you've answered this.

This list is useful at any phase — revisit it when you hit deployment, publishing, or infrastructure questions. A sample's Terraform or registration pattern may be exactly what you need later.

Phase 2: Scaffold (if needed)

First check whether a project already exists: run agents-cli info from the project root. If one was already created or enhanced by agents-cli, skip this phase.

Otherwise, scaffold before writing any code:

• No project yet → agents-cli scaffold create <name>
• Existing code to import → agents-cli scaffold enhance . (adds the agents-cli structure)

Use /google-agents-cli-scaffold for the full workflow — it covers architecture choices (deployment target, agent type, session storage) and project creation or enhancement.

Phase 3: Build and Implement

Implement the agent logic:

1. Write/modify code in the agent directory (check GEMINI.md / CLAUDE.md for directory name)
2. Quick smoke test: Use agents-cli run "your prompt" to verify the agent works after changes — this is the fastest way to check behavior without leaving the terminal
3. Iterate on the implementation based on user feedback

If the user asks for interactive testing, suggest agents-cli playground — it opens a web-based playground for manual conversation with the agent.

For ADK API patterns and code examples, use /google-agents-cli-adk-code.

Smoke-test only here — do not write behavioral pytest. LLM output is non-deterministic; behavioral checks belong in eval (Phase 4), not pytest. Use agents-cli run "prompt" for quick checks.

Provision a datastore (RAG, if the agent uses one)

RAG is a clone-and-study recipe (Phase 1). Datastore provisioning and ingestion live in the sample's own Makefile (e.g. make setup-infra, make data-ingestion) and its README.md / AGENTS.md — follow those, adapting the sample's infra/terraform/ and .env into your project. (The former agents-cli infra datastore / agents-cli data-ingestion commands have been removed.)

Phase 4: Evaluate

This is the most important phase. Evaluation validates agent behavior end-to-end.

MANDATORY: Activate /google-agents-cli-eval before running evaluation. It contains the dataset schema, config format, and critical gotchas. Do NOT skip this.

Do NOT skip this phase. After building the agent, you MUST proceed to evaluation.

uv run pytest vs agents-cli eval — know the difference:

• uv run pytest — Tests code correctness: imports work, functions return expected types, API contracts hold. Does NOT test whether the agent behaves well.
• agents-cli eval — Tests agent behavior: response quality, tool usage, persona consistency, safety compliance. This is what validates your agent actually works.
• agents-cli run "prompt" — Quick one-off smoke test during development. If testing multiple prompts use the --start-server option to persist the local server, which reduces overhead for repeated calls and allows resuming local sessions via --session-id. Use this for fast iteration, not pytest.

NEVER write pytest tests that check LLM response content (e.g., asserting pirate keywords appear, checking if the agent mentions allergies). LLM outputs are non-deterministic. Use eval with LLM-as-judge criteria instead.

1. Start small: Begin with 1-2 sample eval cases, not a full suite
2. Run evaluations: agents-cli eval run (chains generate + grade). For debugging or custom trace locations, use the two-step form: agents-cli eval generate then agents-cli eval grade.
3. Discuss results with the user
4. Fix issues and iterate on the core cases first
5. Only after core cases pass, add edge cases and new scenarios
6. Repeat until quality thresholds are met

Expect 5-10+ iterations here.

Phase 5: Deploy

Once evaluation thresholds are met:

1. Check if the project has a deployment target configured — run agents-cli info to see current config
2. If the project is a prototype (no deployment target), add deployment support first:

   agents-cli scaffold enhance . --deployment-target <target>
   

   See /google-agents-cli-deploy for the deployment target decision matrix (Agent Runtime vs Cloud Run vs GKE).
3. Deploy when ready: agents-cli deploy

IMPORTANT: Never deploy without explicit human approval.

Phase 6: Publish (optional)

Not all agents require this — currently supporting Gemini Enterprise. See /google-agents-cli-publish for registration modes, flags, and troubleshooting.

Phase 7: Observe

After deploying, use observability tools to monitor agent behavior in production. See /google-agents-cli-observability for Cloud Trace, prompt-response logging, BigQuery Analytics, and third-party integrations.

Operational Guidelines for Coding Agents

Common Shortcuts to Resist

Agents routinely skip steps with plausible-sounding excuses. Recognize these and push back:

Principle 1: Code Preservation & Isolation

Code modifications require surgical precision — alter only the code segments directly targeted by the user's request and strictly preserve all surrounding and unrelated code.

Mandatory Pre-Execution Verification:

Before finalizing any code replacement, verify the following:

1. Target Identification: Clearly define the exact lines or expressions to change, based solely on the user's explicit instructions.
2. Preservation Check: Confirm that all code, configuration values (e.g., model, version, api_key), comments, and formatting outside the identified target remain identical.

Example:

• User Request: "Change the agent's instruction to be a recipe suggester."
• Incorrect (VIOLATION):

  root_agent = Agent(
      name="recipe_suggester",
      model="gemini-1.5-flash",  # UNINTENDED - model was not requested to change
      instruction="You are a recipe suggester."
  )
  

• Correct (COMPLIANT):

  root_agent = Agent(
      name="recipe_suggester",  # OK, related to new purpose
      model="gemini-3.6-flash",  # PRESERVED
      instruction="You are a recipe suggester."  # OK, the direct target
  )
  

Principle 2: Execution Best Practices

• Model Selection — CRITICAL:

  • NEVER change the model unless explicitly asked.
  • When creating NEW agents (not modifying existing), use the latest Gemini model. List available models to pick the newest one:

    # Use 'global' or any supported region (e.g. 'us-east1')
    uv run --with google-genai python -c "
    from google import genai
    client = genai.Client(vertexai=True, location='global')
    for m in client.models.list(): print(m.name)
    "
    

  • Do NOT use older models unless explicitly requested. For model docs, fetch https://adk.dev/agents/models/google-gemini/index.md. See also stable model versions.

• Running Python Commands:

  • Always use uv to execute Python commands (e.g., uv run python script.py)
  • Run uv sync before executing scripts

• Breaking Infinite Loops:

  • Stop immediately if you see the same error 3+ times in a row
  • RED FLAGS: Lock IDs incrementing, names appending v5→v6→v7, "I'll try one more time" repeatedly
  • State conflicts (Error 409): Use terraform import instead of retrying creation
  • When stuck: Run underlying commands directly (e.g., terraform CLI)

• Troubleshooting:

  • Check /google-agents-cli-adk-code first — it covers most common patterns
  • Use WebFetch on URLs from the ADK docs index (curl https://adk.dev/llms.txt) for deep dives
  • When encountering persistent errors, a targeted web search often finds solutions faster
  • CLI command failures: run agents-cli <command> --help — the output ends with a Source: line pointing to the exact source file implementing that command. Read it to understand the logic and diagnose failures. Use agents-cli info to get the full CLI install path if you need to browse across multiple files.

Systematic Debugging

When something breaks, follow this sequence — don't skip steps or shotgun fixes:

1. Reproduce — Run the exact command that failed. Save the full error output. If you can't reproduce it, you can't fix it.
2. Localize — Narrow the cause: is it the agent code, a tool, the config, or the environment? Use agents-cli run "prompt" to isolate agent behavior from deployment issues. Add -v (--verbose) to print the full JSON event payloads — useful for inspecting tool calls, intermediate steps, and silent failures.
3. Fix one thing — Change one variable at a time. If you change the instruction AND the tool AND the config simultaneously, you won't know what fixed it (or what broke something else).
4. Verify — Rerun the exact reproduction command. Don't assume the fix worked.
5. Guard — If it was a non-obvious bug, add an eval case to catch regressions.

Stop-the-line rule: If a change breaks something that was working, stop feature work and fix the regression first. Don't push forward hoping to circle back — regressions compound.

• Environment Variables:
  • .env files and env var assignments (e.g., GOOGLE_CLOUD_PROJECT, GOOGLE_CLOUD_LOCATION) are typically required for the agent to function — never remove or modify them unless the user explicitly asks
  • If a .env file exists in the project root, treat it as essential configuration
  • For secrets and API keys, prefer GCP Secret Manager over plain .env entries — see /google-agents-cli-deploy for secret management guidance

Using a Temporary Scaffold as Reference

When you need specific infrastructure files (Terraform, CI/CD, Dockerfile) but don't want to modify the current project, use /google-agents-cli-scaffold to create a temporary project in /tmp/ and copy over what you need.

Reference Files

Development Commands

Run agents-cli --help or agents-cli <command> --help for the authoritative flag list. A per-phase command index lives in references/commands.md; per-phase usage is in the phase sections above.

Skills Version

Troubleshooting hint: If skills seem outdated or incomplete, reinstall:

agents-cli setup --skip-auth

Only do this when you suspect stale skills are causing problems.