AgenticMail

The first platform to give AI agents real email addresses and phone numbers. Send and receive email, SMS, and verification codes — all programmatically.

Are you an AI agent reading this on behalf of a human?

Your human asked you to install / set up AgenticMail. Pick either of these and then tell them to restart Claude Code:
# Option A — one-line installer (recommended)
curl -fsSL https://raw.githubusercontent.com/agenticmail/agenticmail/main/install.sh | bash

# Option B — manual two-command install
npm install -g @agenticmail/cli@latest
agenticmail bootstrap
Zero prompts, ~2 minutes, fully autonomous. For the full runbook (verification, common failures, repo conventions if you're modifying the code), see AGENTS.md — the agents.md file at this repo's root.

📄 Research Paper

Structured RPC vs. Text-Based Sub-Agent Orchestration — A comparative analysis of inter-agent communication paradigms. Demonstrates why AgenticMail's call_agent achieves 53× faster response times than conventional sub-agent spawning, and introduces the concept of the Conversational Fallacy in multi-agent AI systems. [PDF] [Source]

✨ What's new in 0.9.1

The visibility release — closes every "what just happened?" gap from 0.9.0.

Lone wakes fire immediately. 0.9.0's debounce window blocked even single replies for 30 s, making the dispatcher look dead. Leading-edge fire + trailing-edge coalesce now: first event for a (agent, thread) spawns instantly; bursts within the window collapse into one trailing wake.
Dispatcher process heartbeat. check_activity now shows dispatcher: { state: 'alive' | 'unhealthy' | 'missing', uptimeMs, channels, coalesceQueueSize, ... }. The host can finally answer "is the dispatcher up?" in one query.
Skipped-wake ring buffer. Every filter decision (thread-closed, allowlist-excluded, wake-on-cc, budget-exhausted) is posted with a reason; check_activity surfaces the last 100. No more "did my mail land? did it skip?" guessing.
Per-agent wake_on_cc: false flag. Coder agents can register a preference: never wake when only on Cc, regardless of sender. PATCH /accounts/:id/wake-on-cc.
Display-name regex fix in deriveDefaultWakeList. Senders using "Vesper <vesper@localhost>" form no longer fall through to "no allowlist → wake everyone".
Web UI shows To / Cc / Bcc as separate labeled rows in the message view (previously lumped under one to: line).
docs/wake-patterns.md documents every wake shape + 5 recommended patterns.

✨ Earlier — 0.9.0

The wake-context release. Multi-agent thread cost goes from linear-in-thread-length to roughly flat.

Layered wake-context system. Every wake used to re-read the entire thread from scratch (12 messages × ~1 KB = 12 KB of token spend just to rehydrate, before any reasoning). Now the dispatcher prepends two blocks to every wake prompt: Layer 1 — ThreadCache (envelopes + previews of the last 10 messages, shared across CC'd agents) and Layer 2 — AgentMemory (a markdown file each agent writes at end-of-wake describing its own commitments and last actions). Agents read the new event + these two blocks and decide; they don't read_email prior history. New MCP tools save_thread_memory and get_thread_id.
wake default flipped from "everyone CC'd" → "To: only". Mirrors the email convention: To is for action, CC is for awareness. CC'd local agents still receive the mail in their inbox but don't get a Claude turn unless explicitly named in wake. Opt back into the old behaviour with wake: 'all'.
Wake coalescing. Within 30 s for the same (agent, thread), multiple wake events collapse into ONE Claude turn. A burst of 4 quick replies becomes one Claude wake that sees all four in a coalesced batch prompt. Wake-budget charges once. Configurable via wakeCoalesceMs.

Together these eliminate the "wake-thrash" failure mode where an agent fired 4 near-identical status reports because a designer sent 4 replies in 2 minutes.

✨ Earlier — 0.8.31

Compact-and-continue — workers can now run across multiple SDK turns. On a context-overflow error the dispatcher synthesises a breadcrumb checkpoint from the captured log, builds a "resuming after context reset" continuation prompt, and loops (capped at 4 iterations).
Typed task contracts — call_agent / POST /tasks/assign accept an outputSchema (JSON Schema, draft-7 subset). submit_result validates against it; mismatches return 400 with the validator errors so the worker can retry with a corrected shape.
Delete + Move-to-Spam buttons in the message view; Compose auto-saves to Drafts every 2s.
All Mail folder hides itself on servers that don't have one (Stalwart, most non-Gmail). Select-all checkbox now wires through.
Logo background stripped — bow PNG is now RGBA with proper transparency.

✨ Earlier — 0.8.29

Star button wired — clicking the star toggles IMAP's \Flagged flag via the new POST /mail/messages/:uid/star endpoint. Backed by MailReceiver.setStarred in @agenticmail/core. Optimistic UI; revert on failure.
Gmail-compact list UX — single 36 px rows (was 64 px stacked), subject + preview on one truncated line separated by an em-dash, leading checkbox column, sticky list-toolbar with select-all + refresh + count. Same layout for every folder.
Compose button down to 48 px (Gmail's actual size); the giant pink pill is gone.

✨ Earlier — 0.8.27

Folder bug fix — Sent / Drafts / Spam / Trash were returning empty in the web UI because hard-coded folder names didn't match Stalwart's actual IMAP names (e.g. Sent Items not Sent). Now auto-discovered per agent and matched against every common server convention (Stalwart, Gmail, Outlook, macOS Mail).
Two-line preview on every list row — web UI uses /mail/digest?folder=… everywhere instead of /mail/inbox (no preview) + /mail/folders/:folder (no preview).
URL reflects current folder — hash router now uses #/folder/<id> (sent, drafts, spam, …). Back/forward works, URLs are shareable, refresh stays put.
Stop hook output rewritten — terser, audience-neutral, includes body preview. Drops the instruction-leakage from 0.8.25/26.

✨ Earlier — 0.8.25

Workers can now run for hours — dropped the 30-min hard timeout. Each worker writes a per-turn log at ~/.agenticmail/worker-logs/<id>.log, posts heartbeats every 30 s, and runs in its own isolated cwd so parallel agents don't clobber each other's output. New MCP tool tail_worker to read a running worker's log live; check_activity now shows last tool used, turn count, and a stale flag (no auto-eviction).
Autonomous-mode awareness — the mail hook now registers on the Stop event too. Long headless Claude Code runs (no user prompts firing for hours) finally see teammate replies — the hook returns decision: 'block' at turn boundaries when the bridge inbox has new mail, forcing Claude to continue with the new-mail summary in context. Closes the follow-up that 0.8.23 filed.
Fixed agenticmail-mail-hook: command not found errors — hook is now registered with an absolute path resolved at install time. Resilient to any $PATH configuration; old installs auto-heal on the next agenticmail claudecode run.
Web UI fixes — (m.flags ?? []).includes is not a function crash gone; sidebar folders (Sent / Drafts / Spam / Trash) now load their real IMAP mailboxes instead of all hitting /mail/inbox; Cmd+C no longer pops the compose modal; full mobile-responsive layout with an off-canvas sidebar.
Official logos — Claude starburst (from Wikipedia) and the AgenticMail @ mark from branding/ now ship bundled and render as the host avatar + topbar / favicon.
Selective wake — wake: ["alice", "bob"] on send_email / reply_email / forward_email / template_send / manage_drafts(send) tells the dispatcher to give a Claude turn only to named agents. The other CC'd recipients still receive the mail but stay asleep. Cuts token cost on large threads by ~10× when used.
Thread-close markers — [FINAL], [DONE], [CLOSED], or [WRAP] in a subject tells the dispatcher this thread is done; no more wakes on any reply.
check_activity MCP tool — see which agents the dispatcher has woken right now, how long they've been running, and a preview of recent completions. The answer to "did the agent I just emailed actually start working?"
Comprehensive markdown rendering in the shell's email viewer — bold, italic, headings, lists, task lists, tables, fenced code, links, images, HTML entities, depth-colored quote stripes (instead of literal >>>>).
LLM-tolerant tool inputs — batch_mark_read({ uids: "[1,2,3]" }) and other common stringification mistakes now just work; coerced before validation.
Wake-budget circuit breaker — caps per-(agent, thread) wakes at 10 per 24h to stop reply loops and storms.
Dedup guidance — wake prompts now tell agents to check their prior contributions before redoing work.

See CHANGELOG.md for the full release history.

AgenticMail is a self-hosted communication platform purpose-built for AI agents. It runs a local Stalwart mail server via Docker, integrates Google Voice for SMS/phone access, exposes a REST API with 75+ endpoints, ships a lightweight Gmail-style web UI for human oversight, and works with any MCP-compatible AI client and OpenClaw via plugin. Each agent gets its own email address, phone number, inbox, and API key.

Why AgenticMail?
Features
Architecture
Quick Start
CLI Commands
Gateway Modes
Packages
API Overview
MCP Integration
Host Integrations
OpenClaw Integration
Interactive Shell
Security
Configuration
Development
License

Why 🎀 AgenticMail?

AI agents need to communicate with the real world. Email is the universal communication protocol — every person and business has an email address. AgenticMail bridges the gap between AI agents and email by providing:

Isolated mailboxes — each agent has its own email address, inbox, and credentials. Agents can't read each other's mail.
Internet email connectivity — two gateway modes to send/receive real email (Gmail relay or custom domain with DKIM/SPF/DMARC).
Security guardrails — outbound scanning prevents agents from leaking API keys, passwords, or PII. Blocked emails require human approval.
Agent collaboration — agents can email each other, assign tasks, and make synchronous RPC calls.
SMS / Phone number access — integrate Google Voice for SMS receive/send, verification code extraction, and phone number access for AI agents.
Smart orchestration — call_agent replaces basic sub-agent spawning with auto mode detection, dynamic timeouts, runtime tool discovery, and async execution for long-running tasks.
Tool integrations — 62 MCP tools for any AI client, 63 OpenClaw tools, and a 44-command interactive shell.
Self-updating — agenticmail update checks npm, verifies OpenClaw compatibility, and updates both packages automatically.

Features

Email Operations

Send email with text, HTML, attachments, CC/BCC, reply-to, and custom headers
Receive email via IMAP with real-time SSE event streaming (IMAP IDLE)
Reply and forward with proper In-Reply-To and References headers for threading
Search by sender, subject, body text, date range, read/unread status
Folders — create, list, move messages between folders
Batch operations — mark read/unread, delete, move multiple messages at once
Drafts — save, edit, and send draft emails
Templates — reusable email templates with variable substitution
Scheduled sending — queue emails for future delivery
Signatures — per-agent email signatures
Tags — label and categorize messages
Contacts — manage address book per agent

Multi-Agent

Account management — create, list, delete agents with unique email addresses
Agent-to-agent email — agents can email each other directly via @localhost
Task system — assign tasks to agents, claim, submit results, track status
RPC calls — synchronous agent-to-agent calls with timeout (long-poll + SSE notification)
Agent directory — discover other agents by name

You can watch the whole team work in one place with agenticmail shell:

agenticmail shell — Solène (QA) and Cassian (developer) coordinating on a build, all visible from the claudecode bridge inbox

That's a real multi-agent thread captured in the REPL — the host kicked off one email, Solène verified the file Cassian shipped to disk, and every step is sitting there as ordinary mail. No custom orchestration code. Type agenticmail shell any time you want to see what your agents have been up to.

Gateway (Internet Email)

Relay mode (beginner) — use your existing Gmail or Outlook as a relay. Emails appear as [email protected]. Setup takes 2 minutes.
Domain mode (advanced) — custom domain via Cloudflare. Agents send from [email protected] with full DKIM signing, SPF, and DMARC records.
- Automatic DNS configuration (MX, SPF, DKIM TXT, DMARC, tunnel CNAME)
- Cloudflare Tunnel for secure inbound traffic without exposing ports
- Cloudflare Email Worker for Email Routing (catch-all → worker → AgenticMail)
- Optional Gmail SMTP outbound relay for residential IPs without PTR records
- Domain purchase via Cloudflare Registrar
- DNS backup before any modifications
- Automatic @domain email alias for all existing agents

What `setup-email` actually exposes — read before connecting a relay

Heads-up for anyone running agenticmail setup-email (or telling Claude / Codex to do it for them). Once that command succeeds, your sub-agents are reachable from the public internet via Gmail / Outlook plus-addressing. This is the design — not a bug — but the implications surprise some operators:

Every sub-agent has a publicly addressable inbox the moment setup-email finishes. Anyone who knows your relay address can hit yourrelay+<agentname>@gmail.com and the corresponding agent's AgenticMail inbox receives the message. Plus-addresses are publicly guessable (+secretary, +kepler, …) — don't treat them as a secret.
External mail wakes the dispatcher the same way internal @localhost mail does. When a new-mail event lands on a watched inbox, the dispatcher runs dedup + thread-cache + wake-budget checks and spawns a Claude Code (or Codex) worker turn. Source doesn't matter — [email protected] and secretary@localhost are indistinguishable from the dispatcher's point of view.
The host bridge takes a different path. Mail to [email protected] or [email protected] doesn't spawn a worker — it goes to handleBridgeMail, which uses the host SDK's resume option to wake your last session headlessly. If that fails (session expired, host CLI not running), it falls through to the bridge-escalation email at setup_operator_email. So external mail to the bridge can wake your CLI / forward to your phone.
Watchout — spam wakes Claude / Codex turns. A scraper that finds [email protected] in a leaked address book can drive worker turns at your expense. Throttles available, ordered from least invasive:
1. Let the wake-budget guard in dispatcher.handleEvent rate-limit naturally (default cap per minute per agent).
2. Add inbound spam rules at the relay layer so spam gets filtered before the SSE event publishes (built-in spam filter + tags can do this; see the Security section below).
3. For agents that should be internal-only, set metadata.host to a value no dispatcher matches, or stop the relay's IMAP poller from publishing on that inbox.

Security

Outbound guard — scans every outgoing email for sensitive data patterns:
- API keys and tokens (AWS, OpenAI, Stripe, GitHub, etc.)
- Passwords and credentials
- Private keys (SSH, PGP, RSA)
- PII patterns (SSN, credit card numbers)
- Internal URLs and configuration data
- Blocked emails are held for human-only approval (agents cannot self-approve)
Spam filter — rule-based scoring engine for inbound email:
- Categories: phishing, scam, malware, commercial spam, social engineering, lottery scam
- Configurable threshold (default: 40)
- Skips internal agent-to-agent emails
- Runs on both relay inbound and SSE event streams
Human-only approval flow — when an agent's email is blocked:
- The agent is informed the email was blocked and told to notify their owner
- The owner receives a notification email with full blocked email content, warnings, and pending ID
- Only the master key holder can approve or reject (POST /mail/pending/:id/approve)
- Agents can list and view their own pending emails but cannot approve or reject them
- System prompt guidelines instruct agents to inform their owner and wait, never attempt to bypass
DKIM/SPF/DMARC — automatic DNS setup in domain mode for email authentication
Rate limiting — configurable per-endpoint rate limits

SMS / Phone Number Access

Google Voice integration — give agents a real phone number via Google Voice
Direct Voice web reading (primary, instant) — reads SMS directly from voice.google.com via browser
Email forwarding (fallback) — Google Voice forwards SMS to email, agent auto-detects and records them during relay polling
Separate Gmail polling — for users whose GV Gmail differs from relay email, runs a dedicated IMAP poll
Verification codes — automatic extraction of OTP/verification codes from SMS (4-8 digit, alphanumeric, Google G-codes)
Send SMS — record outbound messages, send via Google Voice web automation
Smart setup wizard — validates Gmail/GV email matching, warns about mismatches, collects separate credentials when needed

Smart Orchestration (call_agent)

Auto mode detection — reads task complexity, picks light/standard/full mode automatically
Dynamic timeouts — 60s for quick tasks, 5+ minutes for deep research, 1 hour for async
Runtime tool discovery — probes host config for available tools instead of static deny lists
Async execution — long-running tasks run independently, auto-compact context, email results when done
Structured RPC — sub-agents return JSON, not raw text

Integrations

MCP server — 62 tools for any MCP-compatible AI client
OpenClaw plugin — 63 tools with skill definition and system prompt guidelines
REST API — 75+ endpoints, OpenAPI-style, Bearer token auth
SSE events — real-time inbox notifications via Server-Sent Events
Interactive CLI — 44 shell commands with arrow key navigation, body previews, retry logic
Self-updating — agenticmail update or /update in shell, with OpenClaw compatibility check

Architecture

                  ┌──────────────────────────────────────────────────┐
                  │                    AgenticMail                    │
                  │                                                  │
 AI Client ─MCP─> │  @agenticmail/mcp    (62 tools, stdio transport) │
                  │       │                                          │
 OpenClaw ─────>  │  @agenticmail/openclaw  (63 tools, plugin)       │
                  │       │                                          │
 HTTP clients──>  │       ▼                                          │
                  │  @agenticmail/api     (Express, 75+ endpoints)   │
                  │    ├── Authentication  (master key + agent keys)  │
                  │    ├── Rate limiting   (per-endpoint)             │
                  │    ├── SSE streaming   (real-time inbox events)   │
                  │    └── Spam filter + Outbound guard               │
                  │       │                                          │
                  │       ▼                                          │
                  │  @agenticmail/core    (SDK layer)                 │
                  │    ├── AccountManager  (CRUD agents in Stalwart)  │
                  │    ├── MailSender      (SMTP, nodemailer)         │
                  │    ├── MailReceiver    (IMAP, imapflow)           │
                  │    ├── InboxWatcher    (IMAP IDLE → events)       │
                  │    ├── GatewayManager  (relay + domain routing)   │
                  │    │   ├── RelayGateway      (Gmail/Outlook)      │
                  │    │   ├── CloudflareClient   (DNS, tunnels, etc) │
                  │    │   ├── TunnelManager      (cloudflared)       │
                  │    │   ├── DNSConfigurator    (MX, SPF, DKIM)     │
                  │    │   └── DomainPurchaser    (Registrar API)     │
                  │    ├── StalwartAdmin   (mail server management)   │
                  │    ├── EmailSearchIndex (FTS5 full-text search)   │
                  │    └── Storage         (SQLite + migrations)      │
                  │       │                                          │
                  │       ▼                                          │
                  │  Stalwart Mail Server  (Docker container)         │
                  │    ├── SMTP (port 587) — submission               │
                  │    ├── SMTP (port 25)  — inbound delivery         │
                  │    ├── IMAP (port 143) — mailbox access           │
                  │    └── HTTP (port 8080) — admin API               │
                  └──────────────────────────────────────────────────┘
                          │                         │
            ┌─────────────┘                         └──────────────┐
            ▼                                                      ▼
     Relay Mode                                            Domain Mode
  ┌──────────────────┐                            ┌──────────────────────┐
  │  Gmail / Outlook  │                            │  Cloudflare          │
  │  IMAP polling     │                            │  ├── DNS zone        │
  │  SMTP relay       │                            │  ├── Tunnel          │
  │  Sub-addressing   │                            │  ├── Email Routing   │
  │  (+agent@gmail)   │                            │  ├── Email Worker    │
  └──────────────────┘                            │  └── Registrar       │
                                                   └──────────────────────┘

Data Flow

Sending email (relay mode):

Agent calls POST /mail/send with recipient, subject, body
API runs outbound guard scan — if sensitive data found, email is blocked and owner notified
GatewayManager detects external recipient → routes to RelayGateway
RelayGateway sends via Gmail SMTP as [email protected]
Reply-To set to agent's relay address so replies route back

Sending email (domain mode):

Agent calls POST /mail/send
Outbound guard scan runs
GatewayManager rewrites agent@localhost → [email protected]
Email submitted to local Stalwart via SMTP (port 587)
Stalwart signs with DKIM, resolves MX, delivers directly (or via Gmail relay)

Receiving email (relay mode):

RelayGateway polls Gmail IMAP every 30 seconds for new messages
New email detected → parsed → spam scored
If not spam, delivered to agent's local Stalwart mailbox via SMTP
X-AgenticMail-Relay: inbound header added for identification
InboxWatcher (IMAP IDLE) fires SSE event to connected clients

Receiving email (domain mode):

External sender sends to [email protected]
Cloudflare Email Routing catches all → routes to Email Worker
Worker reads raw RFC822 message, base64-encodes, POSTs to /api/agenticmail/mail/inbound
Inbound endpoint validates secret, parses email, delivers to agent's mailbox
InboxWatcher fires SSE event

Quick Start

Prerequisites

Node.js 22 or later (we use the built-in node:sqlite module — zero native compilation, no node-gyp headaches)
brew (macOS) or apt (Linux) so the wizard can install Colima / Docker if you don't already have it

Two install paths

Path	When to use	Command
Autonomous ✨	Letting an AI agent (e.g. Claude Code) install AgenticMail on your behalf, or you just want zero questions	`npm install -g @agenticmail/cli && agenticmail bootstrap`
Interactive	You want to connect a Gmail relay or your own domain right away	`npm install -g @agenticmail/cli && agenticmail setup`

Autonomous install (recommended for most users)

# Option A — one-liner (does the npm install + bootstrap for you, plus a Node 22+ preflight)
curl -fsSL https://raw.githubusercontent.com/agenticmail/agenticmail/main/install.sh | bash

# Option B — equivalent, manually
npm install -g @agenticmail/cli
agenticmail bootstrap

Either path: zero prompts. The pipeline:

agenticmail setup --yes — auto-installs Colima + Docker if missing, starts the Stalwart mail server, generates your master key, creates a default "secretary" agent. Skips external email/SMS setup (those need user-owned credentials; add them later if you want).
agenticmail service install — registers a launchd plist (macOS) / systemd unit (Linux) so the API auto-starts on boot, and starts it now.
Waits for GET /api/agenticmail/health to come up on the configured port (default http://127.0.0.1:3829).
agenticmail claudecode — wires the Claude Code integration in if you have Claude Code installed (idempotent / no-op otherwise).

After this, you have a fully working local AgenticMail with internal multi-agent coordination over *@localhost. Add an external Gmail relay or your own domain anytime with agenticmail setup (interactive).

Interactive install

npm install -g @agenticmail/cli
agenticmail setup

The wizard walks you through everything: dependency checks, master key generation, mail-server start, optional Gmail relay or custom domain, optional Google Voice SMS, optional OpenClaw integration. Re-runnable any time.

Skip external email entirely?

Yes. AgenticMail works in local-only mode — agents email each other at *@localhost through the bundled Stalwart server with full RFC-822 routing, threading, attachments, and search. That's all the Claude Code multi-agent flow needs. The external Gmail/domain relay is optional and only matters when you want agents to send mail to the public internet.

What the wizard does for you

Checks Node, Colima/Docker, brew/apt
Generates a master API key (saved to ~/.agenticmail/config.json, file mode 0600)
Initialises the SQLite database (node:sqlite — Node 22+ built-in, no native compilation, no prebuilt binaries needed)
Starts Stalwart in a Docker container
Creates your first agent with its own email and API key
Optionally configures a gateway (relay or domain) for internet email

Send your first email (programmatic)

import { AgenticMailClient } from '@agenticmail/cli';

const client = new AgenticMailClient({
  apiUrl: 'http://127.0.0.1:3829',
  apiKey: 'ak_your_agent_api_key',
});

// Send an email
await client.send({
  to: '[email protected]',
  subject: 'Hello from my AI agent',
  text: 'This email was sent by an AI agent using AgenticMail.',
});

// Check inbox
const inbox = await client.listInbox(10);
for (const msg of inbox) {
  console.log(`${msg.from} — ${msg.subject}`);
}

// Read a specific email
const email = await client.readMessage(inbox[0].uid);
console.log(email.text);

Send your first email (CLI)

agenticmail> /send
To: [email protected]
Subject: Test email
Body: Hello from the AgenticMail shell!

Email sent! Message ID: <abc123@localhost>

Send your first email (curl)

curl -X POST http://127.0.0.1:3829/api/agenticmail/mail/send \
  -H "Authorization: Bearer ak_your_agent_key" \
  -H "Content-Type: application/json" \
  -d '{
    "to": "[email protected]",
    "subject": "Hello",
    "text": "Sent via the AgenticMail API."
  }'

CLI Commands

AgenticMail includes a full CLI for managing your server. All commands are available via agenticmail <command> or npx @agenticmail/cli@latest <command>.

Core Commands

Command	Description
`agenticmail`	Start the server (runs setup first if not initialized). Opens the interactive shell after startup. This is the default command — just run `agenticmail` with no arguments.
`agenticmail bootstrap`	✨ Zero-question install. One-shot pipeline: setup + service install + claudecode wiring. Designed for AI agents (Claude Code, scripts, CI) to run on a user's behalf — no prompts, no decisions. Skips Gmail relay and SMS setup (which need user-owned credentials); add them later with `agenticmail setup`.
`agenticmail setup`	Run the setup wizard interactively. Walks you through system checks, account creation, service startup, email connection (Gmail/Outlook/custom domain), phone number setup, and OpenClaw integration. Pass `--yes` (or `-y`, `--non-interactive`) to skip every prompt and use safe defaults. Safe to re-run — won't overwrite existing config.
`agenticmail start`	Start the server and open the interactive shell. Ensures Docker is running, Stalwart is up, and the API server is reachable. Automatically installs the auto-start service if not already set up.
`agenticmail shell`	👀 Drop into the interactive shell against an already-running server. Use this to monitor every agent's inbox, send mail on their behalf, watch the dispatcher event feed, or run any of the 44+ shell commands. Exits cleanly with `/exit`; the server keeps running. Best command to point a user at when they ask "what have my agents been doing?"
`agenticmail web`	🌐 Open the Gmail-style web UI in your browser. Two-column layout (sidebar with Compose + folders / content pane), 24×24 vector icons, hash router, real-time SSE updates, full markdown rendering, compose + reply with the `wake` parameter surfaced as a field. Same master key as the API. Available at `http://127.0.0.1:3829/` whenever the API server is running.
`agenticmail stop`	Stop the server. Kills the background API server process. If auto-start is enabled, it will restart on next boot. Use `agenticmail service uninstall` to fully disable.
`agenticmail status`	Show what's running. Displays the status of Docker, Stalwart, the API server, email connection, and auto-start service.

Integration Commands

Command Description

agenticmail openclaw Set up AgenticMail for OpenClaw. Starts infrastructure, creates an agent, configures the OpenClaw plugin, enables agent auto-spawn via hooks, and restarts the OpenClaw gateway.

agenticmail claudecode ✨ Set up AgenticMail for Claude Code. Provisions a dedicated "claudecode" bridge agent, writes an MCP server entry to ~/.claude.json, generates a Claude Code subagent file per AgenticMail agent under ~/.claude/agents/, and starts the dispatcher daemon (PM2-managed) that auto-wakes agents on inbound mail or /tasks/rpc. No separate Anthropic key needed — workers ride on your existing Claude OAuth. Flags: --status, --remove, --purge-bridge. See @agenticmail/claudecode on npm for the full design.

Command	Description
`agenticmail openclaw`	Set up AgenticMail for OpenClaw. Starts infrastructure, creates an agent, configures the OpenClaw plugin, enables agent auto-spawn via hooks, and restarts the OpenClaw gateway.
`agenticmail claudecode`	✨ Set up AgenticMail for Claude Code. Provisions a dedicated "claudecode" bridge agent, writes an MCP server entry to `~/.claude.json`, generates a Claude Code subagent file per AgenticMail agent under `~/.claude/agents/`, and starts the dispatcher daemon (PM2-managed) that auto-wakes agents on inbound mail or `/tasks/rpc`. No separate Anthropic key needed — workers ride on your existing Claude OAuth. Flags: `--status`, `--remove`, `--purge-bridge`. See @agenticmail/claudecode on npm for the full design.

Service Management (Auto-Start)

AgenticMail installs a system service so it automatically starts when your computer boots. On macOS this is a LaunchAgent; on Linux it's a systemd user service.

Command	Description
`agenticmail service`	Show auto-start status. Displays whether the service is installed and running.
`agenticmail service install`	Install the auto-start service. AgenticMail will start automatically on boot. The startup script waits up to 10 minutes for Docker to be ready, then checks that Stalwart is running (starts it if needed), then launches the API server.
`agenticmail service uninstall`	Remove the auto-start service. AgenticMail will no longer start on boot.
`agenticmail service reinstall`	Reinstall the service. Use this after config changes or updates to refresh the service file.

What happens on reboot:

Your computer starts → Docker Desktop launches (its own auto-start)
Stalwart mail server starts (restart: unless-stopped in Docker)
AgenticMail startup script waits for Docker to be ready (up to 10 min)
Script verifies Stalwart is running (auto-starts it if Docker restarted without it)
API server starts and begins accepting requests

If the API server crashes, the system service automatically restarts it.

Maintenance Commands

Command	Description
`agenticmail update`	Update to the latest version. Checks npm for a new version, updates the CLI and OpenClaw plugin, and restarts the OpenClaw gateway if applicable.
`agenticmail help`	Show available commands.

Logs

Server logs are stored in ~/.agenticmail/logs/:

server.log — API server stdout
server.err.log — API server stderr
startup.log — Boot sequence log (Docker wait times, Stalwart checks)

Gateway Modes

AgenticMail supports two modes for sending/receiving real internet email:

Relay Mode (Beginner-Friendly)

Use your existing Gmail or Outlook account as a relay. No domain purchase needed. Setup takes under 2 minutes.

How it works:

Outbound: emails sent via your Gmail/Outlook SMTP as [email protected]
Inbound: AgenticMail polls your Gmail/Outlook IMAP for new messages addressed to [email protected] and delivers them to the agent's local mailbox
Gmail's + sub-addressing routes replies back to the right agent

Setup:

# In the interactive shell:
agenticmail> /relay

# Or via API:
curl -X POST http://127.0.0.1:3829/api/agenticmail/gateway/relay \
  -H "Authorization: Bearer mk_your_master_key" \
  -H "Content-Type: application/json" \
  -d '{
    "provider": "gmail",
    "email": "[email protected]",
    "password": "xxxx xxxx xxxx xxxx"
  }'

Requirements:

Gmail: App password (not your regular password)
Outlook: App password from Microsoft account security settings

Domain Mode (Advanced)

Full custom domain with Cloudflare. Agents send from [email protected] with proper email authentication.

What gets configured automatically:

Cloudflare DNS zone creation
MX records pointing to Cloudflare Email Routing
SPF record (v=spf1 include:_spf.mx.cloudflare.net ~all)
DKIM key generation and TXT record
DMARC record (v=DMARC1; p=quarantine)
Cloudflare Tunnel (CNAME record, ingress rules)
Cloudflare Email Worker deployment (catches all inbound email)
Catch-all Email Routing rule → Worker → AgenticMail inbound endpoint
Stalwart hostname, DKIM signing, domain principal
@domain email aliases for all existing agents
Optional: Gmail SMTP outbound relay, domain purchase

Setup:

curl -X POST http://127.0.0.1:3829/api/agenticmail/gateway/domain \
  -H "Authorization: Bearer mk_your_master_key" \
  -H "Content-Type: application/json" \
  -d '{
    "cloudflareToken": "your_cf_api_token",
    "cloudflareAccountId": "your_cf_account_id",
    "domain": "yourdomain.com",
    "gmailRelay": {
      "email": "[email protected]",
      "appPassword": "xxxx xxxx xxxx xxxx"
    }
  }'

Cloudflare API token permissions needed:

Zone: DNS (Edit), Email Routing (Edit)
Account: Cloudflare Tunnel (Edit), Workers Scripts (Edit), Registrar (Edit — only if purchasing domains)

Packages

This is a TypeScript monorepo. Seven packages, each shipped to npm independently.

Package	Description	Install
`@agenticmail/cli`	CLI, setup wizard, interactive shell. Install this to get started.	`npm i -g @agenticmail/cli`
`@agenticmail/core`	Core SDK — accounts, SMTP/IMAP, gateway, spam filter, outbound guard, storage	`npm i @agenticmail/core`
`@agenticmail/api`	Express REST API server with 75+ endpoints	`npm i @agenticmail/api`
`@agenticmail/mcp`	MCP server with 60+ tools for any MCP-compatible AI client	`npm i -g @agenticmail/mcp`
`@agenticmail/claudecode`	Anthropic Claude Code integration — registers MCP server + native subagents + lifecycle hooks + dispatcher daemon	`npm i -g @agenticmail/claudecode`
`@agenticmail/codex`	OpenAI Codex CLI integration — same architecture as `@agenticmail/claudecode`, adapted to Codex's TOML config and `spawn_agent` tool	`npm i -g @agenticmail/codex`
`@agenticmail/openclaw`	OpenClaw plugin with 63 tools and skill definition	`openclaw plugin install agenticmail`

Plugin folders (host marketplace manifests, separate from npm packages):

Folder	Host	What's inside
`plugin/`	Claude Code	`.claude-plugin/plugin.json` manifest + `.mcp.json` + skills. Ship target for Anthropic's plugin marketplace.
`plugin-codex/`	OpenAI Codex CLI	`.codex-plugin/plugin.json` manifest + `hooks/hooks.json` + `mcp_servers.toml` snippet + agent template. Ship target for Codex's plugin discovery (`~/.codex/plugins/`).

Dependency graph:

@agenticmail/cli ──────> @agenticmail/api ────> @agenticmail/core
@agenticmail/mcp       (standalone — HTTP calls to API)
@agenticmail/claudecode (peer-dep on @anthropic-ai/claude-agent-sdk)
@agenticmail/codex      (peer-dep on @openai/codex-sdk)
@agenticmail/openclaw   (standalone — HTTP calls to API)

API Overview

All endpoints are under /api/agenticmail. Authentication via Authorization: Bearer <key> header.

Two key types:

Master key (mk_...) — full admin access (create/delete agents, approve blocked emails, gateway config)
Agent key (ak_...) — scoped to one agent (read own inbox, send email, manage own drafts/contacts/etc.)

Key Endpoints

Method	Path	Auth	Description
Mail
`POST`	`/mail/send`	Agent	Send email (text, HTML, attachments)
`GET`	`/mail/inbox`	Agent	List inbox messages (paginated)
`GET`	`/mail/digest`	Agent	Inbox with body previews
`GET`	`/mail/messages/:uid`	Agent	Read full email with headers and attachments
`POST`	`/mail/search`	Agent	Search by from, subject, body, date
`POST`	`/mail/messages/:uid/move`	Agent	Move to folder
`POST`	`/mail/messages/:uid/spam`	Agent	Report as spam
`GET`	`/mail/folders`	Agent	List all folders
`GET`	`/mail/pending`	Both	List blocked outbound emails
`POST`	`/mail/pending/:id/approve`	Master	Approve blocked email
`POST`	`/mail/pending/:id/reject`	Master	Reject blocked email
Accounts
`POST`	`/accounts`	Master	Create new agent
`GET`	`/accounts`	Master	List all agents with metadata
`GET`	`/accounts/me`	Agent	Get own agent info
`DELETE`	`/accounts/:id`	Master	Delete agent (with email archival)
`GET`	`/accounts/directory`	Both	Agent discovery directory
Events
`GET`	`/events`	Agent	SSE stream — new email with route metadata, flags, expunge events
Gateway
`GET`	`/gateway/status`	Both	Current gateway mode and health
`POST`	`/gateway/relay`	Master	Configure relay mode
`POST`	`/gateway/domain`	Master	Configure domain mode
`POST`	`/gateway/test`	Both	Send a test email
Tasks
`POST`	`/tasks/assign`	Both	Assign task to another agent
`POST`	`/tasks/rpc`	Both	Synchronous agent-to-agent RPC (long-poll)
`GET`	`/tasks/pending`	Agent	List tasks assigned to me
`POST`	`/tasks/:id/claim`	Agent	Claim a pending task
`POST`	`/tasks/:id/result`	Agent	Submit task result

Plus endpoints for drafts, contacts, tags, rules, signatures, templates, scheduled emails, spam management, batch operations, domains, and agent deletion/cleanup.

See the API package README for complete endpoint documentation.

MCP Integration

The MCP server exposes 62 tools to any MCP-compatible AI client via stdio transport.

Setup

Add to your MCP client configuration (e.g., .mcp.json or project settings):

{
  "mcpServers": {
    "agenticmail": {
      "command": "npx",
      "args": ["agenticmail-mcp"],
      "env": {
        "AGENTICMAIL_API_URL": "http://127.0.0.1:3829",
        "AGENTICMAIL_API_KEY": "ak_your_agent_key"
      }
    }
  }
}

Desktop Clients

For desktop AI applications, add the same configuration to your app's MCP config file (check your app's documentation for the file location).

What your AI can do

Once connected, your AI can:

"Check my inbox" → list_inbox
"Send an email to [email protected] about the project update" → send_email
"Reply to that last email saying thanks" → reply_email
"Search for emails from Sarah about the budget" → search_emails
"Create a draft response to the client" → manage_drafts
"What tasks are assigned to me?" → check_tasks
"Ask the research agent to look up competitor pricing" → call_agent

See the MCP package README for the full tool list.

Host Integrations

AgenticMail is host-agnostic at the protocol level (it's just SMTP/IMAP/HTTP/MCP under the hood), but each agentic CLI host expects its config + hooks + subagent definitions in a slightly different shape. We ship one host integration package per supported host. Each one:

Registers the AgenticMail MCP server in the host's config so the model can see all 60+ tools.
Surfaces every AgenticMail account as a native sub-agent the model can dispatch to.
Wires up the host's lifecycle hooks (SessionStart, UserPromptSubmit, Stop) so the agent gets a fresh-mail digest and capabilities preamble at the right moments.
Runs a long-lived dispatcher daemon that watches every account's inbox via SSE and spawns a one-shot model turn whenever new mail or a task arrives — so agents wake on each other's replies automatically without polling.

Currently shipping

Host	Package	Plugin folder	Status
Anthropic Claude Code	`@agenticmail/claudecode`	`plugin/`	Shipping (0.2.x)
OpenAI Codex CLI	`@agenticmail/codex`	`plugin-codex/`	Shipping (0.1.x)

Both integrations share the same dispatcher architecture (per-agent serialization, wake-coalesce, wake-budget, restart recovery, capabilities preamble). The host-specific bits are: config-file format (JSON vs TOML), subagent definition syntax (markdown+frontmatter vs TOML heredoc), and the SDK we drive workers through (@anthropic-ai/claude-agent-sdk vs @openai/codex-sdk).

Picking the right install path

You want…	Run
One-line setup for Claude Code	`npm install -g @agenticmail/cli && agenticmail claudecode`
One-line setup for Codex	`npm install -g @agenticmail/codex && agenticmail-codex install`
Install both side-by-side	Run both — they don't conflict. Each writes to its own host's config; the AgenticMail accounts are shared.
Marketplace install (Anthropic plugin store)	Drop `plugin/` into your Claude Code plugin directory and run `/agenticmail-install`.
Marketplace install (Codex `~/.codex/plugins/`)	Copy `plugin-codex/` to `~/.codex/plugins/agenticmail/`.
Programmatic (your own provisioning script)	`import { install } from '@agenticmail/claudecode'` or `'@agenticmail/codex'` — same shape, different host.

Cross-host coordination

The mail layer is the lingua franca. An agent running under Claude Code can email an agent running under Codex (or vice versa) using the exact same send_email({ to, cc, wake }) MCP tool — the message lands in the target's inbox, the target's host-specific dispatcher picks it up, spawns the right kind of turn (Claude or Codex), and the agent replies-all to the thread. From the sender's perspective there's no API difference between "my teammate runs under the same host as me" and "my teammate runs under a different host." That's the whole point of routing through email instead of host-native peer messaging.

Roadmap

Host	Status	Notes
xAI Grok Build CLI	Researched — see wiki	Blocked on getting a SuperGrok Heavy seat to validate the closed-beta config-file paths against the community CLI proxy. ~80% architectural overlap.
Nous Research Hermes Agent	Researched — see wiki	Python-native plugin (`pip install hermes-agent-agenticmail`). ~75% architectural overlap with claudecode/codex.

OpenClaw Integration

Already have OpenClaw? Two steps:

# Step 1 — Install AgenticMail globally and run the setup wizard
npm install -g @agenticmail/cli && agenticmail setup

# Step 2 — Connect AgenticMail to your OpenClaw instance
agenticmail openclaw

That's it. The global install gives you the agenticmail command. The openclaw command will start the mail server, create an agent, and merge the plugin config into your openclaw.json automatically. Your OpenClaw agent now has its own email address.

Manual Configuration

If you prefer to configure manually, add to ~/.openclaw/openclaw.json:

{
  "plugins": {
    "agenticmail": {
      "enabled": true,
      "config": {
        "apiUrl": "http://127.0.0.1:3829",
        "apiKey": "ak_your_agent_key",
        "masterKey": "mk_your_master_key"
      }
    }
  }
}

The plugin survives OpenClaw updates — plugin configuration lives in user config (~/.openclaw/openclaw.json), not in the OpenClaw source directory.

Chat with Your AI Agent

Use /chat in the AgenticMail shell to talk directly to your OpenClaw agent in real-time:

╭───────────────────────────────────────────────╮
│ ❯ what's the weather in NYC?                  │
╰───────────────────────────────────────────────╯
                                          You 👤
                                  ╭──────────────╮
                                  │ what's the   │
                                  │ weather in   │
                                  │ NYC?         │
                                  ╰──────────────╯
🎀 Fola
╭──────────────────────────────────────╮
│ Currently 42°F and cloudy in NYC.    │
╰──────────────────────────────────────╯

WebSocket connection to OpenClaw gateway with Ed25519 device auth
Bubble-style chat UI with markdown rendering
Animated thinking indicator with elapsed timer
Multi-line input (Enter sends, \ + Enter for new lines)

Smart Sub-Agent Spawning

The call_agent tool intelligently spawns sub-agents:

Auto mode detection — light (simple tasks), standard (web research), full (multi-agent coordination)
Dynamic timeouts — 60s / 180s / 300s based on complexity
Dynamic tool discovery — probes OpenClaw config at runtime instead of static deny lists
Async mode — call_agent(async=true) for long-running tasks. The caller polls /tasks/assigned for completion; the assigned agent emails the result back to the caller when it has email capability enabled. In a localhost-only / no-relay setup the result still lands in the caller's local mailbox, so check /mail/inbox if you don't see an SMTP delivery.
Web search fallback — uses DuckDuckGo when Brave API isn't configured

See the OpenClaw package README for the full tool list.

Interactive Shell

The CLI includes a full-featured interactive shell with 44 commands:

agenticmail> /inbox

  ★ 1  [email protected]          Project Update           2m ago
    2  [email protected]         Re: Budget Review        1h ago
    3  [email protected]  [repo] New issue #42     3h ago

  ─────────────────────────────────────────────────
  Page 1/3 ─ [←] prev [→] next [v] toggle previews [Esc] back

  Use ↑↓ arrow keys to select, Enter to read inline

Key features:

Arrow key navigation with cursor selection
Body preview toggle (press v)
Inline email reading (press Enter)
Unread markers (★)
3-retry input validation on all prompts
Paginated views with ←/→ navigation

Command Reference

Email:       /inbox /send /read /reply /forward /search /delete /save
             /thread /unread /archive /trash
Organize:    /folders /contacts /drafts /signature /templates /schedule /tag
Agents:      /agents /switch /deleteagent /deletions
Security:    /spam /rules /pending
Gateway:     /relay /digest /setup /status /openclaw
System:      /help /clear /exit

Security

Outbound Guard

Every outgoing email is scanned before sending. The guard detects:

Category	Examples
API keys	`sk-...`, `AKIA...`, `ghp_...`, `sk_live_...`
Credentials	`password: ...`, `secret: ...`, `token: ...`
Private keys	`-----BEGIN RSA PRIVATE KEY-----`
PII	Social security numbers, credit card patterns
Internal data	Localhost URLs, internal IPs, config file contents

When sensitive data is detected:

Email is blocked and saved to the pending_outbound table
Agent receives a response explaining what was blocked and why, with instructions to inform their owner
Owner (master key holder) is notified via email with the full blocked email content, security warnings, recipient, subject, and pending ID
Owner approves or rejects via the master key API (POST /mail/pending/:id/approve or /reject) or by replying to the notification email
Agents cannot approve or reject their own blocked emails — the approve/reject endpoints require the master key
Agents can only list and view their pending emails to check approval status
MCP and OpenClaw tools enforce this by rejecting approve/reject actions with a message directing agents to inform their owner
System prompt guidelines (OpenClaw) instruct agents to never attempt self-approval or rewrite emails to bypass detection

Spam Filter

Inbound emails are scored against rule-based patterns:

Category	Score Range	Examples
Phishing	10-30	Fake login pages, urgency language, spoofed senders
Scam	15-25	Nigerian prince, lottery winner, inheritance schemes
Malware	20-30	Suspicious attachments, executable links
Commercial	5-15	Unsolicited marketing, unsubscribe-heavy emails
Social engineering	10-20	Impersonation, authority pressure

Emails scoring >= 40 (configurable) are moved to Spam folder
Emails scoring 20-39 get a warning flag
Internal agent-to-agent emails skip spam filtering entirely
Relay-rewritten emails (@localhost from, external replyTo) are always treated as external

Authentication

Master key — full admin access, required for agent creation/deletion, gateway config, email approval
Agent API keys — scoped per-agent, can only access own inbox and send from own address
Inbound webhook secret — authenticates Cloudflare Email Worker requests to the inbound endpoint

Configuration

Environment Variables

# === Required ===
AGENTICMAIL_MASTER_KEY=mk_your_key          # Master API key (generate: openssl rand -hex 32)

# === Stalwart Mail Server ===
STALWART_ADMIN_USER=admin                   # Stalwart admin username
STALWART_ADMIN_PASSWORD=changeme            # Stalwart admin password
STALWART_URL=http://localhost:8080          # Stalwart HTTP admin URL

# === SMTP/IMAP (local Stalwart) ===
SMTP_HOST=localhost                         # SMTP host
SMTP_PORT=587                               # SMTP submission port
IMAP_HOST=localhost                         # IMAP host
IMAP_PORT=143                               # IMAP port

# === Optional ===
AGENTICMAIL_API_PORT=3829                   # API server port (default: 3829 — chosen to
                                            # avoid 3000/3100/3200/3300/4000/5000/8000/8080
                                            # which are all common dev-tool defaults)
AGENTICMAIL_API_HOST=127.0.0.1              # API bind host (default: 127.0.0.1; loopback only)
AGENTICMAIL_DATA_DIR=~/.agenticmail         # Data directory for SQLite DB and config

# === Gateway: Relay Mode ===
RELAY_PROVIDER=gmail                        # gmail or outlook
[email protected]                   # Your email address
RELAY_PASSWORD=xxxx xxxx xxxx xxxx          # App password

# === Gateway: Domain Mode ===
CLOUDFLARE_API_TOKEN=your_token             # Cloudflare API token
CLOUDFLARE_ACCOUNT_ID=your_account_id       # Cloudflare account ID
AGENTICMAIL_DOMAIN=yourdomain.com           # Your domain
AGENTICMAIL_INBOUND_SECRET=your_secret      # Shared secret for Email Worker

# === Gmail SMTP Relay (domain mode outbound) ===
[email protected]             # Gmail address for outbound relay
GMAIL_RELAY_APP_PASSWORD=xxxx xxxx xxxx     # Gmail app password

# === Debug ===
# AGENTICMAIL_DEBUG=1                       # Enable verbose per-message logging

Docker Compose

# docker-compose.yml (included in repo)
services:
  stalwart:
    image: stalwartlabs/stalwart:latest
    container_name: agenticmail-stalwart
    ports:
      - "8080:8080"   # HTTP Admin + JMAP
      - "587:587"     # SMTP Submission
      - "143:143"     # IMAP
      - "25:25"       # SMTP Inbound
    volumes:
      - stalwart-data:/opt/stalwart
      - ~/.agenticmail/stalwart.toml:/opt/stalwart/etc/stalwart.toml:ro
    restart: unless-stopped

SQLite Database

AgenticMail stores all state in a SQLite database at ~/.agenticmail/agenticmail.db. As of @agenticmail/[email protected] we use Node's built-in node:sqlite module (stable since Node 22) instead of better-sqlite3. The migration removed all native compilation from the install path — no node-gyp, no prebuilt-binary version-mismatch issues, no Python prerequisites. The on-disk database format is unchanged (it's still SQLite 3), so existing ~/.agenticmail/agenticmail.db files continue to work without migration.

Tables:

agents — agent accounts (name, email, API key, metadata)
gateway_config — relay or domain mode configuration
pending_outbound — blocked emails awaiting approval
delivered_messages — deduplication tracking for inbound relay
spam_log — spam scoring history
agent_tasks — inter-agent task assignments
email_rules — per-agent email filtering rules
contacts, drafts, signatures, templates, scheduled_emails, tags

Development

Setup

git clone https://github.com/agenticmail/agenticmail.git
cd agenticmail
npm install
docker compose up -d
npm run build
npm test

Project Structure

agenticmail/
├── agenticmail/           # CLI facade package (npm: agenticmail)
│   └── src/
│       ├── cli.ts         # CLI entry point (setup, start, status)
│       ├── shell.ts       # Interactive REPL (44 commands)
│       └── index.ts       # Re-exports from @agenticmail/core
├── packages/
│   ├── core/              # @agenticmail/core
│   │   └── src/
│   │       ├── accounts/  # Agent CRUD, roles, deletion
│   │       ├── mail/      # Sender, receiver, parser, spam filter, outbound guard
│   │       ├── inbox/     # IMAP IDLE watcher
│   │       ├── gateway/   # Relay, Cloudflare, DNS, tunnel, domain purchase
│   │       ├── stalwart/  # Stalwart admin API client
│   │       ├── storage/   # SQLite database, migrations, search index
│   │       ├── domain/    # Domain management
│   │       └── setup/     # Dependency checker, installer
│   ├── api/               # @agenticmail/api
│   │   └── src/
│   │       ├── app.ts     # Express app factory
│   │       ├── routes/    # 8 route modules (mail, accounts, events, etc.)
│   │       └── middleware/ # Auth, rate limiting, error handling
│   ├── mcp/               # @agenticmail/mcp
│   │   └── src/
│   │       ├── index.ts   # MCP server entry (stdio transport)
│   │       ├── tools.ts   # 63 tool definitions and handlers
│   │       └── resources.ts
│   └── openclaw/          # @agenticmail/openclaw
│       ├── index.ts       # Plugin entry, system prompt
│       ├── src/tools.ts   # 63 tool definitions and handlers
│       └── skill/         # SKILL.md, reference docs, scripts
├── docker-compose.yml     # Stalwart mail server
├── .env.example           # Environment variable template
└── package.json           # Workspace root

Build Commands

# Build all packages
npm run build

# Build a single package
cd packages/core && npx tsup src/index.ts --format esm --dts --clean

# Run all tests
npm test

# Run tests for a specific package
cd packages/core && npx vitest run

Publish to npm

Publish in dependency order:

cd packages/core && npm publish
cd packages/api && npm publish
cd packages/mcp && npm publish
cd packages/openclaw && npm publish
cd agenticmail && npm publish

All scoped packages have "publishConfig": { "access": "public" } configured.

See CONTRIBUTING.md for development guidelines.

Telemetry

AgenticMail collects anonymous usage statistics to help improve the product. We track:

Tool call counts (which tools are popular)
Package version and OS platform
Anonymous install ID (random UUID, no personal data)

We never collect API keys, email content, addresses, or any personal information.

Opt out by setting the environment variable:

export AGENTICMAIL_TELEMETRY=0
# or
export DO_NOT_TRACK=1

Telemetry is also automatically disabled in CI environments.

Troubleshooting

OpenClaw plugin ID mismatch warning

plugin id mismatch (manifest uses "agenticmail", entry hints "openclaw")

This is harmless. OpenClaw infers the plugin ID from the npm package name (@agenticmail/openclaw) but the manifest declares "id": "agenticmail". The plugin loads and works correctly.

OpenClaw plugin path not found

If OpenClaw reports the plugin path not found, update plugins.load.paths in ~/.openclaw/openclaw.json to point to the correct location:

npm prefix -g
# Plugin is at: <prefix>/lib/node_modules/@agenticmail/openclaw

`agenticmail: command not found`

Use npx agenticmail for one-off usage, or install globally with npm install -g @agenticmail/cli.

License

MIT - Ope Olatunji (@ope-olatunji)

AgenticMail

AgenticMail

Are you an AI agent reading this on behalf of a human?

📄 Research Paper

✨ What's new in 0.9.1

✨ Earlier — 0.9.0

✨ Earlier — 0.8.31

✨ Earlier — 0.8.29

✨ Earlier — 0.8.27

✨ Earlier — 0.8.25

Table of Contents

Why 🎀 AgenticMail?

Features

Email Operations

Multi-Agent

Gateway (Internet Email)

What setup-email actually exposes — read before connecting a relay

Security

SMS / Phone Number Access

Smart Orchestration (call_agent)

Integrations

Architecture

Data Flow

Quick Start

Prerequisites

Two install paths

Autonomous install (recommended for most users)

Interactive install

Skip external email entirely?

What the wizard does for you

Send your first email (programmatic)

Send your first email (CLI)

Send your first email (curl)

CLI Commands

Core Commands

Integration Commands

Service Management (Auto-Start)

Maintenance Commands

Logs

Gateway Modes

Relay Mode (Beginner-Friendly)

Domain Mode (Advanced)

Packages

API Overview

Key Endpoints

MCP Integration

Setup

Desktop Clients

What your AI can do

Host Integrations

Currently shipping

Picking the right install path

Cross-host coordination

Roadmap

OpenClaw Integration

Manual Configuration

Chat with Your AI Agent

Smart Sub-Agent Spawning

Interactive Shell

Command Reference

Security

Outbound Guard

Spam Filter

Authentication

Configuration

Environment Variables

Docker Compose

SQLite Database

Development

Setup

Project Structure

Build Commands

Publish to npm

Telemetry

Troubleshooting

OpenClaw plugin ID mismatch warning

OpenClaw plugin path not found

agenticmail: command not found

License

Похожие серверы

What `setup-email` actually exposes — read before connecting a relay

`agenticmail: command not found`