Agent Email

English | Español | 简体中文 | Português (Brasil) | Deutsch

email-agent-mcp by UseJunior -- local email connectivity for AI agents.

Agent Email is an open-source TypeScript MCP server that lets Claude Code, Cursor, Gemini CLI, OpenClaw, and other MCP-compatible runtimes read email, search threads, draft replies, label messages, change read state, move messages, and send mail through your own mailbox. Microsoft 365 / Outlook and Gmail are supported today. Security-first defaults mean agents cannot send email until you explicitly configure an allowlist.

Quick Start

npx -y email-agent-mcp

The interactive setup wizard walks you through OAuth configuration and mailbox selection.

What Works Today

• Microsoft 365 / Outlook mailbox access through MCP stdio
• list_emails, read_email, search_emails, and get_thread
• create_draft, update_draft, send_draft, send_email, and reply_to_email
• label_email, mark_read, and move_to_folder
• send allowlists, delete disabled by default, and sanitized errors

The current launch-prep pass was validated against a real Outlook mailbox for read, draft, send, categorize, move, and read-state flows.

Why This Exists

AI agents need to read, reply to, and act on email, but email APIs are complex. OAuth flows, Graph delta queries, Gmail push subscriptions, HTML-to-markdown conversion, threading semantics -- each provider has its own quirks.

Agent Email wraps this complexity into deterministic MCP tools with security guardrails:

• send and receive allowlists that control who agents can contact
• delete disabled by default (requires explicit opt-in)
• error sanitization that strips API keys, file paths, and stack traces
• body file sandboxing with path traversal protection

Use with Claude Code

Add to ~/.claude/settings.json or your project .claude/settings.json:

{
  "mcpServers": {
    "email-agent-mcp": {
      "type": "stdio",
      "command": "npx",
      "args": ["-y", "email-agent-mcp"]
    }
  }
}

Use with Cursor

// .cursor/mcp.json
{
  "mcpServers": {
    "email-agent-mcp": {
      "command": "npx",
      "args": ["-y", "email-agent-mcp"]
    }
  }
}

Use with Gemini CLI

gemini extensions install https://github.com/UseJunior/email-agent-mcp

Use with OpenClaw

Add an mcp block to ~/.openclaw/openclaw.json:

{
  // ... existing config ...
  mcp: {
    servers: {
      email: {
        command: "npx",
        args: ["tsx", "/path/to/email-agent-mcp/packages/email-mcp/src/serve-entry.ts"],
        transport: "stdio"
      }
    }
  }
}

Version note: The mcp config key requires OpenClaw app >= 2026.3.24. If the CLI is older than the app, it may reject this key during validation even though the gateway accepts it. Update the CLI with npm install openclaw@latest in your NemoClaw directory, or restart the gateway directly with launchctl kickstart -k gui/501/ai.openclaw.gateway.

Email watcher

The watcher polls your mailbox and sends wake signals to OpenClaw when new email arrives:

# Set the hooks token (must match hooks.token in openclaw.json)
export OPENCLAW_HOOKS_TOKEN="your-hooks-token"

# Start the watcher (defaults to http://localhost:18789/hooks/wake)
npm run dev:watch

The watcher requires at least one configured mailbox. Run npx email-agent-mcp or npm run dev:configure first to complete the OAuth flow.

Launch Prep Smoke Test

Before recording a demo, run the live smoke script against a real mailbox and a safe send allowlist. The script exercises:

• get_mailbox_status
• list_emails + read_email
• mark_read unread -> read -> unread
• label_email on a safe inbox candidate
• create_draft
• draft-only reply_to_email
• optional send_email

Example:

EMAIL_AGENT_MCP_HOME=/tmp/email-agent-mcp-live \
AGENT_EMAIL_SEND_ALLOWLIST=/tmp/email-agent-mcp-live/send-allowlist.json \
npm run launch:prep:smoke -- --live-write --send-to [email protected]

Default safe-candidate selection looks for [email protected] in the inbox so you can rehearse the recording flow on a public-safe message instead of customer mail. If your mailbox status name is not an email address, pass --reply-sender <email> or set EMAIL_AGENT_MCP_REPLY_SENDER so the script can find a self-sent message for the draft-reply check.

Tool Reference

Agent Email exposes 15 MCP tools:

Tool	Description	Type
list_emails	List recent emails with filtering	read
read_email	Read full email content as markdown	read
search_emails	Full-text search across mailboxes	read
get_mailbox_status	Connection status and warnings	read
get_thread	Full conversation context	read
send_email	Send new email (allowlist-gated)	write
reply_to_email	Reply with RFC threading	write
create_draft	Create email draft	write
update_draft	Update draft content	write
send_draft	Send a saved draft	write
label_email	Apply labels/categories	write
flag_email	Flag/unflag emails	write
mark_read	Mark as read/unread	write
move_to_folder	Move between folders	write
delete_email	Delete (requires opt-in)	destructive

Provider Support

Provider	Status	Package
Microsoft 365 (Graph API)	Fully supported	@usejunior/provider-microsoft
Gmail	Supported via interactive CLI OAuth or manual refresh-token setup	@usejunior/provider-gmail

Use email-agent-mcp configure --provider gmail to run the local browser OAuth flow, or add a manual mailbox token file under ~/.email-agent-mcp/tokens/. See packages/provider-gmail/README.md.

Security Defaults

Agent Email ships with restrictive defaults that you loosen as needed:

• Send allowlist: empty by default -- agents cannot send email until you add recipients
• Receive allowlist: accepts all by default -- controls which senders trigger the watcher
• Delete disabled: agents cannot delete email unless you set user_explicitly_requested_deletion: true
• Error sanitization: API keys, file paths, and stack traces are redacted from error responses
• Body file sandboxing: no ../ traversal, no symlinks, binary detection

Packages

Package	Description
@usejunior/email-core	Core email actions, content engine, security, and provider interfaces
@usejunior/email-mcp	MCP server adapter, CLI, and watcher
@usejunior/provider-microsoft	Microsoft Graph API email provider
@usejunior/provider-gmail	Gmail API email provider
email-agent-mcp	Distribution wrapper (npx email-agent-mcp)

Quality and Trust Signals

• CI runs on every pull request and push to main (lint, typecheck, tests on Node 20 + 22)
• CodeQL and Semgrep security scanning
• Coverage published to Codecov
• OpenSpec traceability enforcement via npm run check:spec-coverage
• 300+ tests across the suite
• Maintainer: Steven Obiajulu

Architecture

email-agent-mcp/
├── packages/
│   ├── email-core          Core actions, content engine, security
│   ├── email-mcp           MCP server adapter, CLI, watcher
│   ├── provider-microsoft  Microsoft Graph provider
│   ├── provider-gmail      Gmail API provider
│   └── email-agent-mcp         Distribution wrapper (npx entry point)
├── openspec/               Spec-driven development
└── scripts/                CI and validation scripts

Releasing

Tag-driven release via GitHub Actions with npm OIDC trusted publishing. All 5 packages publish in dependency order with --provenance, then server.json is published to the official MCP Registry with mcp-publisher.

FAQ

Does this work with Claude Code?

Yes. Run npx email-agent-mcp to start the MCP server, then configure it in your Claude Code settings.

Can agents send email without my permission?

No. The send allowlist is empty by default. Agents cannot send any email until you explicitly configure allowed recipients.

Does this store my email credentials?

OAuth tokens are managed by MSAL (Microsoft) and stored in your OS keychain or local config files under ~/.email-agent-mcp/. Agent Email never stores raw passwords.

Can I connect multiple mailboxes?

Yes. You can configure Microsoft 365 and Gmail simultaneously. Read actions default to your primary mailbox; write actions require specifying a mailbox when multiple are configured.

The OpenClaw CLI rejects my config with "Unrecognized key: mcp"

The OpenClaw CLI and macOS app can be different versions. The app (which runs the gateway) may support config keys the CLI doesn't recognize yet. Update the CLI: cd ~/Projects/NemoClaw && npm install openclaw@latest. Alternatively, restart the gateway directly: launchctl kickstart -k gui/501/ai.openclaw.gateway.

The watcher starts but finds zero mailboxes

Mailbox credentials are stored in ~/.email-agent-mcp/tokens/. If this directory is empty, run npx email-agent-mcp or npm run dev:configure to authenticate via OAuth. The watcher will exit with no mailboxes to poll until at least one is configured.

OpenClaw says "Demo mode -- run email-agent-mcp configure to connect"

The MCP server is running but has no real mailbox credentials. Run npx email-agent-mcp to complete the interactive OAuth setup, then restart the OpenClaw gateway so the MCP server reconnects with valid tokens.

Token expired after a week even though I just authenticated

Microsoft refresh tokens typically last 90 days, but your Azure AD tenant may enforce shorter lifetimes. The code uses MSAL with OS keychain persistence (@azure/identity-cache-persistence), which handles silent token refresh automatically. If MSAL reports interaction_required or invalid_grant, re-run npx email-agent-mcp to re-authenticate. Common causes: conditional access policies, MFA re-verification requirements, or admin-configured token lifetime policies.

OpenClaw Telegram bot receives messages but doesn't respond

Verify the Telegram channel is healthy with openclaw status. If the channel shows OK but no responses come back, check that: (1) your Telegram user ID is in channels.telegram.allowFrom in openclaw.json, (2) a binding exists matching channel: "telegram", and (3) the gateway was restarted after config changes. For one-owner bots, use dmPolicy: "allowlist" with explicit allowFrom IDs rather than relying on pairing approvals.

Development

npm ci
npm run build
npm run lint --workspaces --if-present
npm run test:run
npm run check:spec-coverage

See Also

• Safe DOCX Suite -- surgical editing of Word documents with coding agents
• Open Agreements -- fill standard legal templates with coding agents

Privacy

Agent Email runs entirely on your local machine. Email credentials are stored in your OS keychain (MSAL) and local config files. No email content is sent to external servers by Agent Email itself.

Governance

• Contributing Guide
• Code of Conduct
• Security Policy
• Changelog