SpendGate

npx add-mcp 'https://spendgate.toolweather.workers.dev/mcp'

SpendGate

SpendGate helps an autonomous agent decide whether to approve a planned spend before it pays.

It returns a score from 0 to 100, a verdict of approve, ask_human, or block, short reasons, a recommended_action, and checked_at. The score is deterministic. Rewording the purpose will not fish for a better verdict.

SpendGate does not send the merchant payment and does not hold a wallet key. Overage fees, when configured, are x402 USDC payments on Base to the PAY_TO address you set.

When an agent should use it

Call score_spend or POST /v1/score before a tool transfers crypto, buys a gift card, starts a subscription, or pays an API or merchant.

• Pass the amount in USD, the category, the merchant or endpoint URL, and any daily or monthly budget you still have. If the amount is over a budget you supply, the verdict is block.
• approve means pay. ask_human means stop and ask a person. block means do not pay.
• Amounts strictly under the free micro threshold (default $1) return approve, unless they exceed a budget you passed in.
• Skip it for pure reads that do not spend. If you do check a health probe, use category status_check.
• Keep your own hard cap. SpendGate is a second look, not the only lock.
• Do not retry with a softer purpose to change the score. v1 does not store the body, and the math does not depend on prose.

Free spend watches are not in v1.

Scoring v1

Start at 100, then subtract. Policy version 1. Full constants: GET /v1/policy.

Input	Effect
Amount	min(75, round(25 * log10(1 + usd))). Higher spend lowers the score.
Merchant	Known host or known_merchant hint: 0. Unknown: 18. Missing: 24. Non-https, IP, or local URL: +12. PayCheck suspicious: 30. PayCheck block: 42, verdict block, score at most 24.
Category	High 30: crypto_transfer, irreversible, gift_card. Medium 12: api_call, saas, infra. Low 0: status_check. Anything else: 18.
Currency	USD and USDC: 0. USDT, DAI, USDP, PYUSD: 6. Other: 12. Default USDC.
Risk hints	Raising hints add 6 each, cap 18. Lowering hints subtract 6 each, cap 12. Hints are self-reported.

Thresholds after penalties: 70 approve, 40 ask a human, below that block.

Hard overrides, applied after the raw score:

1. Amount greater than daily_budget_remaining or monthly_budget_remaining forces block and caps the published score at 24. Omitted budgets are not checked. Equal to the remaining budget is allowed.
2. Otherwise, amount strictly under the micro threshold forces approve and raises the published score to at least 80.

agent_id is echoed and not scored.

PayCheck

When the merchant is a domain, an http(s) URL, or a 0x wallet, and it is not already a public https host on the local known-host list, SpendGate calls PayCheck POST /v1/check with { "target": "..." }. The deployed Worker uses the PAYCHECK service binding (service = "paycheck"). A public *.workers.dev fetch from another worker on the same account fails, so that URL is only the fallback for tests and for a process with no binding.

PayCheck verdict	SpendGate
trusted	Known merchant, same as the allowlist or known_merchant.
unknown	Today's unknown-merchant handling. Not auto-trusted.
suspicious	Merchant penalty 30 (plus 12 if the URL is insecure). Not known.
block	Merchant penalty 42 (plus 12 if insecure). Verdict block, published score at most 24, including under the $1 micro threshold.

openai.com and the other KNOWN_HOST_SUFFIXES stay known with no network call, so a PayCheck outage does not change them. Any other PayCheck failure (timeout, non-OK, bad JSON) falls back to the local merchant rules and score_spend still returns a score. detail.paycheck_error is timeout, http_status:<code>, parse, or network on that fallback, and the Worker logs paycheck lookup failed: …. A raw IP or http URL keeps the insecure penalty on that fallback.

The lookup is SpendGate's internal call, not a second charge to the caller. It does not forward the caller's sg_live_ key or x-tw-bundle-client. Auth, in order: optional PAYCHECK_API_KEY; else BUNDLE_PROXY_SECRET with SpendGate's own bundle client 7370656e6467617465 (hex for spendgate, 1,000 PayCheck checks per UTC day); else PayCheck's anonymous free tier (100 per UTC day). No new secret is required. PAYCHECK_URL defaults to https://paycheck.toolweather.workers.dev.

Free tier and x402

Tier	Cap	How
Anonymous	100 scores / UTC day	No key
Free key	1,000 scores / UTC day	POST /v1/keys
Toolweather key (hex client)	1,000 scores / UTC day	Matching x-tw-bundle-secret plus a hex x-tw-bundle-client
Toolweather anonymous caller	100 scores / UTC day	Matching secret plus an anon: client id. Same cap as anonymous. get_quota still reports subject and tier bundle.
Overage	$0.001 USDC per score	x402 on Base after the cap

The Toolweather Worker proxies score_spend, get_quota, and spendgate_get_api_key to this server. When it sends x-tw-bundle-secret equal to this Worker's BUNDLE_PROXY_SECRET, quota is charged to x-tw-bundle-client. A hex client (a Toolweather API key hash, 16–128 hex characters; a longer value uses a stable 128-character prefix) gets the free-key cap of 1,000 scores per UTC day. An anonymous Toolweather caller (anon: plus that hash) gets the same 100 scores per UTC day as a direct anonymous caller, so a rotating egress address does not mint a fresh 1,000-score bucket. get_quota reports subject and tier bundle for both, with daily_limit set to the cap that applies. The raw client id is not stored. A presented sg_live_… key still wins. A missing, unset, or wrong secret keeps the anonymous IP bucket and does not return an error just because the headers are absent. Key minting through the proxy uses the same client id for the daily mint cap.

• Network eip155:8453 (Base mainnet).
• Asset USDC 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913 (EIP-712 name USD Coin, version 2).
• Facilitator https://facilitator.payai.network (POST /verify, then POST /settle).
• Price is 1000 atomic units (6 decimals).
• Quota reads, key mints, docs, and MCP discovery are not billed.
• Set PAY_TO to the 0x address that should receive USDC. If it is unset, over-cap scores return 402 with payment_not_configured. The server will not invent a wallet.

A paid retry:

1. POST /v1/score with no payment header.
2. Read HTTP 402 and the base64 PAYMENT-REQUIRED header (the JSON body mirrors it).
3. Sign EIP-3009 TransferWithAuthorization for the accepted requirement.
4. Retry with PAYMENT-SIGNATURE set to the base64 x402 v2 payment payload.
5. The score comes back with PAYMENT-RESPONSE after settle. The same nonce returns the original score and does not settle again.

API

curl -s http://127.0.0.1:43123/v1/score \
  -H 'content-type: application/json' \
  -d '{
    "amount": 12,
    "currency": "USDC",
    "category": "api_call",
    "purpose": "embeddings for the planner",
    "merchant": "https://api.openai.com/v1",
    "agent_id": "agent_planner",
    "daily_budget_remaining": 40,
    "risk_hints": []
  }'

curl -s http://127.0.0.1:43123/v1/keys \
  -H 'content-type: application/json' \
  -d '{"label":"planner"}'

curl -s http://127.0.0.1:43123/v1/quota \
  -H "authorization: Bearer sg_live_..."

Other routes:

• GET /health
• GET /v1/policy
• GET /openapi.json
• GET /llms.txt and GET /llms-full.txt
• GET /.well-known/mcp (and /.well-known/mcp.json)
• GET /.well-known/x402
• POST /mcp streamable HTTP, protocol 2025-06-18 (also accepts 2025-03-26)

MCP

curl -s http://127.0.0.1:43123/mcp \
  -H 'content-type: application/json' \
  -H 'accept: application/json, text/event-stream' \
  -d '{"jsonrpc":"2.0","id":1,"method":"initialize","params":{"protocolVersion":"2025-06-18","capabilities":{},"clientInfo":{"name":"example","version":"0"}}}'

curl -s http://127.0.0.1:43123/mcp \
  -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","id":2,"method":"tools/call","params":{"name":"score_spend","arguments":{"amount":0.2,"category":"status_check","merchant":"https://www.cloudflare.com","agent_id":"agent_demo"}}}'

Tools: score_spend, get_quota, get_api_key.

After the free cap, tools/call on score_spend returns HTTP 402 with a JSON-RPC error (-32002) and the PAYMENT-REQUIRED header. get_quota and get_api_key stay free.

Run locally

Requires Node 20+.

npm install
npx wrangler d1 migrations apply spendgate --local
npm run dev

The site and API listen on http://127.0.0.1:43123.

Optional receiving wallet, in .dev.vars (gitignored, copy from .dev.vars.example):

PAY_TO=0xYourAddress

npm test
npm run typecheck

Deploy

Free Cloudflare plan: one Worker, one D1 database, static assets from public/. No paid SaaS and no secrets in the repo.

npx wrangler d1 create spendgate
# Put the returned database_id in wrangler.toml (the committed id is a placeholder).
npx wrangler d1 migrations apply spendgate --remote
npx wrangler secret put PAY_TO
npx wrangler secret put BUNDLE_PROXY_SECRET
npx wrangler deploy

BUNDLE_PROXY_SECRET must be the same value as on the Toolweather Worker. Set it after merge, then redeploy. Do not commit the value. Until that secret is set, proxied calls without an sg_live_… key keep sharing the anonymous daily bucket. The same secret, when set, also attributes SpendGate's PayCheck lookups to SpendGate's internal bundle client. PAYCHECK_URL is already in [vars]. PAYCHECK_API_KEY is optional (npx wrangler secret put PAYCHECK_API_KEY) and is not required for the anonymous PayCheck tier.

npm run dry-run bundles the Worker the way a deploy would, without publishing.

To host the HTML on Pages by itself: npx wrangler pages deploy public. The API still needs the Worker. Serving both from the Worker is the setup wrangler.toml uses.

database_id in wrangler.toml is a placeholder UUID. Replace it before a real remote deploy. Do not put a production wallet in [vars].