FigureDeck US Mortgage Data
2026 conforming loan limits for all 3,235 US counties, plus mortgage payment and affordability math. No API key.
Hosted MCP Server
npx add-mcp 'https://mcp.figuredeck.com/mcp'Installs into Claude Code, Codex, Cursor and more
Documentation
2026 Conforming Loan Limit: Where Your Loan Sits Against the Line
In 2026, 3075 of the 3235 US counties share exactly one conforming loan limit — $832,750. Only 160 are higher. Type any county name — all 3235 are searchable, including the 3075 where the answer is the baseline — enter the price and your down payment, and this page answers what a lookup table cannot: how far your loan sits from the line, and how much more down payment would put it back under.
$
$
$0above the 2026 county conforming limit (zero means the loan fits)
Loan amount
$800,000
2026 one-unit limit for this county
$832,750
Room left under the limit
$32,750
Highest price at the same down payment
$932,750
Extra down payment to fit under the limit
$0
A zero in the headline means the loan is at or below the county limit — it does not mean the loan will be sold to Fannie Mae or Freddie Mac, which is the lender's decision. "Room left" goes negative once the loan is over the line; the extra down payment figure is that same gap, expressed as what it would take to close it.
Why your county is the wrong variable
Of the 3235 counties in the 2026 FHFA file, 3075 — 95.1% — carry exactly the same one-unit limit: $832,750. Only 160 counties are higher. That means for about 19 buyers in 20, looking up the county changes nothing at all, and the number that actually decides the outcome is the loan amount, not the map.
Most limit pages stop at the table — find your county, read the number, done. The table is real, but on its own it hides the distribution: the whole country is not spread across a range of limits, it is piled on a single number with a thin tail of 160 counties above it. The tail is below, in full, because it is the only part that carries information.
The 160 counties above the baseline split into two different reasons, and conflating them is the most common error on limit pages: 39 are in Alaska, Hawaii, Guam and the US Virgin Islands, where statute sets a higher baseline, and 121 are mainland or Hawaii markets whose median home value clears the high-cost threshold. Alaska's 30 counties are not expensive; they are statutory.
The 160 counties where the 2026 limit is higher
All 160 counties whose one-unit limit exceeds $832,750 in 2026 are listed below, highest first, so a reader who lands on this paragraph alone still knows what the table is and which year it belongs to. Everything not listed here is $832,750. Alaska, Hawaii, Guam and the US Virgin Islands enter at $1,249,125 because a separate statutory baseline applies to them; Maui and Kalawao in Hawaii reach $1,299,500 on local median home value, which remains under Hawaii's own $1,873,675 ceiling.
| County | State | 2026 one-unit limit |
|---|---|---|
| Kalawao County, HI | HI | $1,299,500 |
| Maui County, HI | HI | $1,299,500 |
| Aleutians East Borough, AK | AK | $1,249,125 |
| Aleutians West Census Area, AK | AK | $1,249,125 |
| Anchorage Municipality, AK | AK | $1,249,125 |
| Bethel Census Area, AK | AK | $1,249,125 |
| Bristol Bay Borough, AK | AK | $1,249,125 |
| Chugach Census Area, AK | AK | $1,249,125 |
| Copper River Census Area, AK | AK | $1,249,125 |
| Denali Borough, AK | AK | $1,249,125 |
| Dillingham Census Area, AK | AK | $1,249,125 |
| Fairbanks North Star Borough, AK | AK | $1,249,125 |
| Haines Borough, AK | AK | $1,249,125 |
| Hoonah-Angoon Census Area, AK | AK | $1,249,125 |
| Juneau City And Borough, AK | AK | $1,249,125 |
| Kenai Peninsula Borough, AK | AK | $1,249,125 |
| Ketchikan Gateway Borough, AK | AK | $1,249,125 |
| Kodiak Island Borough, AK | AK | $1,249,125 |
| Kusilvak Census Area, AK | AK | $1,249,125 |
| Lake And Peninsula Borough, AK | AK | $1,249,125 |
| Matanuska-Susitna Borough, AK | AK | $1,249,125 |
| Nome Census Area, AK | AK | $1,249,125 |
| North Slope Borough, AK | AK | $1,249,125 |
| Northwest Arctic Borough, AK | AK | $1,249,125 |
| Petersburg Census Area, AK | AK | $1,249,125 |
| Prince Of Wales-Hyder Census Area, AK | AK | $1,249,125 |
| Sitka City And Borough, AK | AK | $1,249,125 |
| Skagway Municipality, AK | AK | $1,249,125 |
| Southeast Fairbanks Census Area, AK | AK | $1,249,125 |
| Wrangell City And Borough, AK | AK | $1,249,125 |
| Yakutat City And Borough, AK | AK | $1,249,125 |
| Yukon-Koyukuk Census Area, AK | AK | $1,249,125 |
| Alameda County, CA | CA | $1,249,125 |
| Contra Costa County, CA | CA | $1,249,125 |
| Los Angeles County, CA | CA | $1,249,125 |
| Marin County, CA | CA | $1,249,125 |
| Orange County, CA | CA | $1,249,125 |
| San Benito County, CA | CA | $1,249,125 |
| San Francisco County, CA | CA | $1,249,125 |
| San Mateo County, CA | CA | $1,249,125 |
| Santa Clara County, CA | CA | $1,249,125 |
| Santa Cruz County, CA | CA | $1,249,125 |
| Eagle County, CO | CO | $1,249,125 |
| District Of Columbia, DC | DC | $1,249,125 |
| Guam, GU | GU | $1,249,125 |
| Hawaii County, HI | HI | $1,249,125 |
| Honolulu County, HI | HI | $1,249,125 |
| Kauai County, HI | HI | $1,249,125 |
| Teton County, ID | ID | $1,249,125 |
| Dukes County, MA | MA | $1,249,125 |
| Nantucket County, MA | MA | $1,249,125 |
| Charles County, MD | MD | $1,249,125 |
| Frederick County, MD | MD | $1,249,125 |
| Montgomery County, MD | MD | $1,249,125 |
| Prince George'S County, MD | MD | $1,249,125 |
| Alexandria City, VA | VA | $1,249,125 |
| Arlington County, VA | VA | $1,249,125 |
| Clarke County, VA | VA | $1,249,125 |
| Culpeper County, VA | VA | $1,249,125 |
| Fairfax City, VA | VA | $1,249,125 |
| Fairfax County, VA | VA | $1,249,125 |
| Falls Church City, VA | VA | $1,249,125 |
| Fauquier County, VA | VA | $1,249,125 |
| Fredericksburg City, VA | VA | $1,249,125 |
| Loudoun County, VA | VA | $1,249,125 |
| Manassas City, VA | VA | $1,249,125 |
| Manassas Park City, VA | VA | $1,249,125 |
| Prince William County, VA | VA | $1,249,125 |
| Rappahannock County, VA | VA | $1,249,125 |
| Spotsylvania County, VA | VA | $1,249,125 |
| Stafford County, VA | VA | $1,249,125 |
| Warren County, VA | VA | $1,249,125 |
| St. Croix Island, VI | VI | $1,249,125 |
| St. John Island, VI | VI | $1,249,125 |
| St. Thomas Island, VI | VI | $1,249,125 |
| Jefferson County, WV | WV | $1,249,125 |
| Teton County, WY | WY | $1,249,125 |
| Garfield County, CO | CO | $1,209,750 |
| Pitkin County, CO | CO | $1,209,750 |
| Calvert County, MD | MD | $1,209,750 |
| Bergen County, NJ | NJ | $1,209,750 |
| Essex County, NJ | NJ | $1,209,750 |
| Hudson County, NJ | NJ | $1,209,750 |
| Hunterdon County, NJ | NJ | $1,209,750 |
| Middlesex County, NJ | NJ | $1,209,750 |
| Monmouth County, NJ | NJ | $1,209,750 |
| Morris County, NJ | NJ | $1,209,750 |
| Ocean County, NJ | NJ | $1,209,750 |
| Passaic County, NJ | NJ | $1,209,750 |
| Somerset County, NJ | NJ | $1,209,750 |
| Sussex County, NJ | NJ | $1,209,750 |
| Union County, NJ | NJ | $1,209,750 |
| Bronx County, NY | NY | $1,209,750 |
| Kings County, NY | NY | $1,209,750 |
| Nassau County, NY | NY | $1,209,750 |
| New York County, NY | NY | $1,209,750 |
| Putnam County, NY | NY | $1,209,750 |
| Queens County, NY | NY | $1,209,750 |
| Richmond County, NY | NY | $1,209,750 |
| Rockland County, NY | NY | $1,209,750 |
| Suffolk County, NY | NY | $1,209,750 |
| Westchester County, NY | NY | $1,209,750 |
| Pike County, PA | PA | $1,209,750 |
| Madison County, VA | VA | $1,209,750 |
| Summit County, UT | UT | $1,150,000 |
| Wasatch County, UT | UT | $1,150,000 |
| San Diego County, CA | CA | $1,104,000 |
| Lake County, CO | CO | $1,092,500 |
| Summit County, CO | CO | $1,092,500 |
| Moffat County, CO | CO | $1,089,050 |
| Routt County, CO | CO | $1,089,050 |
| King County, WA | WA | $1,063,750 |
| Pierce County, WA | WA | $1,063,750 |
| Snohomish County, WA | WA | $1,063,750 |
| Ventura County, CA | CA | $1,035,000 |
| Cannon County, TN | TN | $1,029,250 |
| Cheatham County, TN | TN | $1,029,250 |
| Davidson County, TN | TN | $1,029,250 |
| Dickson County, TN | TN | $1,029,250 |
| Hickman County, TN | TN | $1,029,250 |
| Macon County, TN | TN | $1,029,250 |
| Maury County, TN | TN | $1,029,250 |
| Robertson County, TN | TN | $1,029,250 |
| Rutherford County, TN | TN | $1,029,250 |
| Smith County, TN | TN | $1,029,250 |
| Sumner County, TN | TN | $1,029,250 |
| Trousdale County, TN | TN | $1,029,250 |
| Williamson County, TN | TN | $1,029,250 |
| Wilson County, TN | TN | $1,029,250 |
| Napa County, CA | CA | $1,017,750 |
| San Luis Obispo County, CA | CA | $1,000,500 |
| Wayne County, UT | UT | $997,050 |
| Monterey County, CA | CA | $994,750 |
| San Miguel County, CO | CO | $994,750 |
| Monroe County, FL | FL | $990,150 |
| Greater Bridgeport Planning Region, CT | CT | $977,500 |
| Western Connecticut Planning Region, CT | CT | $977,500 |
| Essex County, MA | MA | $962,550 |
| Middlesex County, MA | MA | $962,550 |
| Norfolk County, MA | MA | $962,550 |
| Plymouth County, MA | MA | $962,550 |
| Suffolk County, MA | MA | $962,550 |
| Rockingham County, NH | NH | $962,550 |
| Strafford County, NH | NH | $962,550 |
| Santa Barbara County, CA | CA | $941,850 |
| Sonoma County, CA | CA | $897,000 |
| Grand County, CO | CO | $883,200 |
| Boulder County, CO | CO | $879,750 |
| Adams County, CO | CO | $862,500 |
| Arapahoe County, CO | CO | $862,500 |
| Broomfield County, CO | CO | $862,500 |
| Clear Creek County, CO | CO | $862,500 |
| Denver County, CO | CO | $862,500 |
| Douglas County, CO | CO | $862,500 |
| Elbert County, CO | CO | $862,500 |
| Gilpin County, CO | CO | $862,500 |
| Jefferson County, CO | CO | $862,500 |
| Park County, CO | CO | $862,500 |
| Naugatuck Valley Planning Region, CT | CT | $851,000 |
| Grand County, UT | UT | $839,500 |
Source: FHFA conforming loan limit values for calendar year 2026, all counties, one-unit column.
How the $832,750 figure was set
The 2026 baseline is $832,750, up from the prior year, and the ceiling for one-unit properties is $1,249,125 — exactly 150 percent of the baseline. The ceiling matters because it caps how high any high-cost county can go: a county whose median home value would justify more than $1,249,125 is still held at $1,249,125.
county limit = 115% of local median home value, when that exceeds the baseline
county limit = baseline, otherwise
county limit = min(computed value, 150% of baseline)
150% of $832,750 = $1,249,125
- The 115 percent test is why the distribution is so lopsided: most counties never clear it, so they default to the baseline.
- The 150 percent ceiling is why the tail is short: the highest mainland limit in 2026 is $1,249,125, not whatever the local median would imply.
- Alaska, Hawaii, Guam and the US Virgin Islands are set by separate statutory provisions, which is why 39 of the 160 above-baseline counties are there.
- Only the one-unit column is used here. Two-to-four-unit properties carry higher limits in the same file and are outside this page's arithmetic.
Which counties are already capped
The ceiling is not a hypothetical. Of the 160 counties above the baseline, 75 — 46.9% — sit at exactly $1,249,125. In those counties the limit has stopped being a computed number and become a cap: a higher median home value no longer buys a larger conforming loan, because the figure it would produce is already above the line.
The next cluster down is the New York metropolitan counties — 27 of them at $1,209,750, which is $39,375 below the ceiling. That gap is the whole difference between a market where the 115 percent rule still sets the limit and one where it has stopped mattering. Only two counties in the entire file sit above the mainland ceiling: Maui and Kalawao in Hawaii, at $1,299,500. They can, because Hawaii's statutory ceiling is $1,873,675 rather than $1,249,125 — the same statute that puts Alaska's 30 counties at $1,249,125 regardless of what Alaskan homes cost.
Across all 160 counties there are only 25 distinct limit values. That is the shape of the 2026 file: one number covering 95% of the country, a 160-county tail above it, and inside that tail a hard stop that catches almost half of it. A county table shows none of this, because a table sorts by name and the structure only appears when you sort by limit.
What crossing the line actually changes
A loan above the county limit is not eligible for purchase by Fannie Mae or Freddie Mac in that county, which is what "jumbo" means in practice. The consequence is not a penalty written into law — it is that the loan moves out of the standard secondary market and into whatever a lender prices it at.
This page deliberately does not put a rate on that gap. There is no published, checkable national figure for the jumbo spread that would survive being quoted back at us six months from now, and inventing one would make every other number on the page less believable. What is checkable is the distance: the headline figure above is exact, and the extra-down-payment cell is the same gap in the currency that actually closes it.
If the gap is small, the cheapest fix is usually a lower price or a larger down payment, not a different lender. If the gap is large relative to the price, the loan was never going to be conforming in that county at any down payment short of an all-cash purchase — check the highest-price cell before shopping rates.
Where a county has a limit of its own
Most of the country is published at the baseline, so a county lookup only changes something where the figure differs. These are the counties readers ask about most often, each linked to its own page with the three-year record:
- King County, Washington — shares the Seattle metro figure with two neighbouring counties: King County limit
- San Diego County, California — carries a figure no other county in the country uses: San Diego County limit
- Los Angeles County, California — pinned at the ceiling, unchanged by local prices: Los Angeles County limit
- Orange County, California — the same number as Los Angeles, because it is the same metro area: Orange County limit
- Riverside County, California — on the national baseline despite being in California: Riverside County limit
- Maricopa County, Arizona — every county in the state sits on the baseline: Maricopa County limit
- Douglas County, Colorado — one of ten Denver-metro counties published at one figure: Douglas County limit
- Jefferson County, Colorado — the same assignment as Douglas and eight others: Jefferson County limit
- Broward County, Florida — only one county in the state sits higher: Broward County limit
- Miami-Dade County, Florida — one figure covers all of South Florida: Miami-Dade County limit
Reading the answer
The headline is the amount above the limit, so zero is the ordinary, healthy case: the loan fits. A positive number is the exact amount by which it does not. "Room left" is the same gap with the sign kept, which is why it is the more useful figure in a negotiation — it tells you how much price you can still add before the loan stops being conforming.
- Same down payment, higher price: room falls one dollar for every dollar of price.
- Same price, higher down payment: room rises one dollar for every dollar of down payment, because the loan falls by that dollar.
- Switching to a county with a higher limit changes the ceiling, not your loan — which is why the extra-down-payment figure stays put when you change counties.
Getting the data instead of the page
The table above is one rendering of a 3235-row file. Both forms of the file are published as-is — with the source CSV, the licence and a citation string inside them — because a page is a bad place to take a number from. It shows the 160 counties above the baseline and leaves out the 3075 that sit at $832,750, and it will not stay in step with a spreadsheet that copied it.
- CSV — fips, county, state, limit_1_unit through limit_4_unit. 3235 rows plus a header row.
- JSON — the same 3235 records, each with a five-digit FIPS, plus the source file, licence, field descriptions and citation embedded in the file itself.
The source is the FHFA calendar-year 2026 county file, released 2025-11-25. It is a US federal government work: public domain, with FHFA asking for attribution and that no endorsement be implied. Cite the page as FigureDeck, Conforming Loan Limits 2026 (FHFA).
If this is going into an assistant rather than a spreadsheet, the same numbers are served as a Model Context Protocol endpoint: the county lookup, a monthly payment calculator and an affordability calculator, callable as tools. It reads the same file this page reads and runs the same formulas, and the two are compared field by field on every deploy.
Questions this page answers
Is the conforming loan limit the same in every county?
For 2026, yes in 3,075 of 3,235 counties — all of them at $832,750. The remaining 160 are listed above, and 39 of those are Alaska, Hawaii, Guam and the US Virgin Islands, where a separate statutory baseline of $1,249,125 applies.
Can I look up a county that is not in the table above?
Yes. The search box covers all 3235 counties in the FHFA file, including the 3075 whose limit is exactly the $832,750 baseline — those simply are not listed in the table, which only shows the 160 counties above it. Type the county name and the page uses that county's limit.
What happens if my loan is above the limit?
It becomes a jumbo loan in that county: Fannie Mae and Freddie Mac will not buy it, so it is priced by the lender instead of the standard secondary market. This page shows the exact gap and the extra down payment that would close it, but not a rate, because no published national jumbo spread is stable enough to quote.
Does a higher county limit mean I can borrow more?
It means a larger loan can still be conforming. Whether you qualify depends on income, debts and the lender's own underwriting, none of which this page models.
Why is the ceiling exactly 150 percent?
The statutory formula sets the high-cost ceiling at 150 percent of the baseline. For 2026 that is $1,249,125, which caps every county regardless of local median home value.
Do these limits apply to two- and three-unit properties?
No — the FHFA file carries higher limits for two-, three- and four-unit properties. This page uses the one-unit column only, which is the case for a single-family purchase.
Every external figure on this page, with its source
2026 Conforming Loan Limit: Where Your Loan Sits Against the Line lists each external figure it uses once, with the publisher that issues it and the date it was retrieved. The calculator takes these as its defaults, so any of them can be replaced with a number of your own; a figure that is not in the list is one this page did not take from anywhere.
| Figure | Value | Published by | Retrieved |
|---|---|---|---|
| FHFA conforming loan limits, all counties, one-unit (dataset version) | 2026 | Federal Housing Finance Agency (FHFA) | 2026-10-23 |
Values are the ones this page is built with, not a live feed. Where a figure is revised on a schedule, the retrieval date above is when it was read, and the next scheduled refresh is shown at the top of the page.
Where the numbers come from
- Primary source Federal Housing Finance Agency (FHFA) — www.fhfa.gov · retrieved 2026-10-23. Conforming loan limit values for calendar year 2026, all counties, one-unit column. Every limit on this page comes from this file. Dataset version 2026 — the whole county table was regenerated from that release.
- Primary source FHFA — www.fhfa.gov · retrieved 2026-10-23. Announcement of the 2026 values: baseline $832,750, one-unit ceiling $1,249,125 (150 percent of baseline), and the separate statutory provisions for Alaska, Hawaii, Guam and the US Virgin Islands.
- Primary source Consumer Financial Protection Bureau — www.consumerfinance.gov · retrieved 2026-10-01. What a conforming loan is and what changes when a loan is not eligible for purchase by the Enterprises.
Free reference tool — not financial advice. This page performs arithmetic on the numbers you enter and shows its working. It does not know your income, obligations, tax position or goals, it recommends nothing, and nothing here is an offer, a quote or a solicitation. Results are provided as is, without warranty of any kind. Lenders, issuers and tax authorities set their own terms and prevail over anything computed here. Check anything material against the issuing authority's own documentation, or with a licensed professional in your jurisdiction, before you act on it. Full terms of use.
Related calculators Mortgage payment calculator · Down payment calculator · How much house you can afford (PITI) · True monthly payment · FHA vs conventional · Points vs down payment · What crossing the limit step by step costs
Put this calculator on your own site
Any site can embed this calculator with the two lines below. It is free, needs no sign-up or key, and it carries the same formulas and the same sourced figures as the full page — the embed simply leaves out the commentary. The one condition is that the credit line stays with it.
<iframe src="https://figuredeck.com/embed/mortgage/conforming-limit/" title="2026 Conforming Loan Limit: Where Your Loan Sits Against the Line" width="100%" height="940" style="border:1px solid #d7dce3;border-radius:12px;max-width:100%" loading="lazy"></iframe>
<p style="font:13px/1.5 -apple-system,BlinkMacSystemFont,sans-serif">Calculator by <a href="https://figuredeck.com/us/mortgage/conforming-limit/">FigureDeck</a> — free, no sign-up.</p>
This is the only thing we ask for in return for the embed, and it is what keeps the tool free. Open the embed on its own to see exactly what a visitor would get, or read the embed terms and see every calculator available to embed.
Cluster us/mortgage · Unit us-mortgage-conforming-limit · Engine conforming-limit / jumbo · Method: Loan = price − down payment. Over-limit = max(loan − county limit, 0). The highest price that stays conforming at the same down payment = county limit + down payment. Extra down payment needed = over-limit amount. County limits come from the FHFA calendar-year 2026 county file; one-unit (single-family) column only.